90 FR 71 pgs. 15684-15689 - Fiberglass Door Panels From the People's Republic of China: Initiation of Less-Than-Fair-Value Investigation
Type: NOTICEVolume: 90Number: 71Pages: 15684 - 15689
Pages: 15684, 15685, 15686, 15687, 15688, 15689Docket number: [A-570-201]
FR document: [FR Doc. 2025-06383 Filed 4-14-25; 8:45 am]
Agency: Commerce Department
Sub Agency: International Trade Administration
Official PDF Version: PDF Version
[top]
DEPARTMENT OF COMMERCE
International Trade Administration
[A-570-201]
Fiberglass Door Panels From the People's Republic of China: Initiation of Less-Than-Fair-Value Investigation
AGENCY:
Enforcement and Compliance, International Trade Administration, Department of Commerce.
DATES:
Applicable April 9, 2025.
FOR FURTHER INFORMATION CONTACT:
Samuel Frost, Office V, AD/CVD Operations, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482-8180.
SUPPLEMENTARY INFORMATION:
The Petition
On March 20, 2025, the U.S. Department of Commerce (Commerce) received an antidumping duty (AD) petition concerning imports of fiberglass door panels from the People's Republic of China (China) filed in proper form on behalf of the American Fiberglass Door Coalition (the petitioner), 1 the members of which are domestic producers of fiberglass door panels. 2 The AD Petition was accompanied by a countervailing duty (CVD) petition concerning imports of fiberglass door panels from China. 3
Footnotes:
1 ?The members of the American Fiberglass Door Coalition are Therma-Tru Corporation, PlastPro Doors Inc., and Owens Corning.
2 ? See Petitioner's Letter, "Petition for the Imposition of Antidumping and Countervailing Duties," dated March 20, 2025 (Petition).
3 ? Id.
Between March 24 and April 1, 2025, Commerce requested supplemental information pertaining to certain aspects of the Petition in supplemental questionnaires. 4 Between March 26 and April 3, 2025, the petitioner filed timely responses to these requests for additional information. 5
Footnotes:
4 ? See Commerce's Letters, "Supplemental Questions," dated March 24, 2025 (First General Issues Questionnaire); "Supplemental Questions," dated March 24, 2025; and "Supplemental Questions," dated March 31, 2025; see also Memorandum, "Teleconference with Counsel to the Petitioner," dated April 1, 2025 (April 1, 2025, Memorandum).
5 ? See Petitioner's Letters, "Petitioner Response to 1st Supplemental Questionnaire Regarding Common Issues and Injury Volume I of the Petition," dated March 27, 2025 (First General Issues Supplement); "Petitioner Response to 1st Supplemental Questionnaire Regarding Volume II of the Petition," dated March 26, 2025; "Petitioner Response to 2nd Supplemental Questionnaire Regarding Volume II of the Petition," dated April 2, 2025; and "Petitioner Response to 2nd Supplemental Questionnaire Regarding Common Issues and Injury Volume I of the Petition," dated April 3, 2025 (Second General Issues Supplement).
[top] In accordance with section 732(b) of the Tariff Act of 1930, as amended (the Act), the petitioner alleges that imports of fiberglass door panels from China are being, or are likely to be, sold in the United States at less than fair value
Commerce finds that the petitioner filed the Petition on behalf of the domestic industry, because the petitioner is an interested party, as defined in section 771(9)(E) of the Act. 6 Commerce also finds that the petitioner demonstrated sufficient industry support for the initiation of the requested LTFV investigation. 7
Footnotes:
6 ?The members of the petitioning coalition are interested parties under section 771(9)(C) of the Act.
7 ? See section on "Determination of Industry Support for the Petition," infra.
Period of Investigation
Because the Petition was filed on March 20, 2025, and because China is a non-market economy (NME) pursuant to 19 CFR 351.204(b)(1), the period of investigation (POI) for the LTFV investigation is July 1, 2024, through December 31, 2024.
Scope of the Investigation
The product covered by this investigation are fiberglass door panels from China. For a full description of the scope of this investigation, see the appendix to this notice.
Comments on the Scope of the Investigation
On March 24 and April 1, 2025, Commerce requested information and clarification from the petitioner regarding the proposed scope to ensure that the scope language in the Petition is an accurate reflection of the product for which the domestic industry is seeking relief. 8 On March 27 and April 3, 2025, the petitioner provided clarifications and revised the scope. 9 The description of merchandise covered by this investigation, as described in the appendix to this notice, reflects these clarifications.
Footnotes:
8 ? See First General Issues Questionnaire; see also April 1, 2025, Memorandum.
9 ? See First General Issues Supplement at 2-6 and Exhibit I-Supp-2; see also Second General Issues Supplement at 1-4 and Exhibit I-Supp2-1.
As discussed in the Preamble to Commerce's regulations, we are setting aside a period for interested parties to raise issues regarding product coverage ( i.e., scope). 10 Commerce will consider all scope comments received from interested parties and, if necessary, will consult with interested parties prior to the issuance of the preliminary determination. If scope comments include factual information, 11 all such factual information should be limited to public information. To facilitate preparation of its questionnaires, Commerce requests that scope comments be submitted by 5:00 p.m. Eastern Time (ET) on April 29, 2025, which is 20 calendar days from the signature date of this notice. Any rebuttal comments, which may include factual information, and should also be limited to public information, must be filed by 5:00 p.m. ET on May 9, 2025, which is 10 calendar days from the initial comment deadline.
Footnotes:
10 ? See Antidumping Duties; Countervailing Duties, Final Rule, 62 FR 27296, 27323 (May 19, 1997) ( Preamble ); see also 19 CFR 351.312.
11 ? See 19 CFR 351.102(b)(21) (defining "factual information").
Commerce requests that any factual information that parties consider relevant to the scope of this investigation be submitted during that period. However, if a party subsequently finds that additional factual information pertaining to the scope of the investigation may be relevant, the party must contact Commerce and request permission to submit the additional information. All scope comments must be filed simultaneously on the records of the concurrent LTFV and CVD investigations.
Filing Requirements
All submissions to Commerce must be filed electronically via Enforcement and Compliance's Antidumping Duty and Countervailing Duty Centralized Electronic Service System (ACCESS), unless an exception applies. 12 An electronically filed document must be received successfully in its entirety by the time and date it is due.
Footnotes:
12 ? See Antidumping and Countervailing Duty Proceedings: Electronic Filing Procedures; Administrative Protective Order Procedures, 76 FR 39263 (July 6, 2011); see also Enforcement and Compliance: Change of Electronic Filing System Name, 79 FR 69046 (November 20, 2014) for details of Commerce's electronic filing requirements, effective August 5, 2011. Information on using ACCESS can be found at https://access.trade.gov/help.aspx and a handbook can be found at https://access.trade.gov/help/Handbook_on_Electronic_Filing_Procedures.pdf.
Comments on Product Characteristics
Commerce is providing interested parties an opportunity to comment on the appropriate physical characteristics of fiberglass door panels to be reported in response to Commerce's AD questionnaires. This information will be used to identify the key physical characteristics of the subject merchandise in order to report the relevant factors of production (FOP) accurately, as well as to develop appropriate product comparison criteria.
Interested parties may provide any information or comments that they feel are relevant to the development of an accurate list of physical characteristics. In order to consider the suggestions of interested parties in developing and issuing the AD questionnaires, all product characteristics comments must be filed by 5:00 p.m. ET on April 29, which is 20 calendar days from the signature date of this notice. Any rebuttal comments must be filed by 5:00 p.m. ET on May 9, 2025, which is 10 calendar days from the initial comment deadline. All comments and submissions to Commerce must be filed electronically using ACCESS, as explained above, on the record of the LTFV investigation.
Determination of Industry Support for the Petition
Section 732(b)(1) of the Act requires that a petition be filed on behalf of the domestic industry. Section 732(c)(4)(A) of the Act provides that a petition meets this requirement if the domestic producers or workers who support the petition account for: (i) at least 25 percent of the total production of the domestic like product; and (ii) more than 50 percent of the production of the domestic like product produced by that portion of the industry expressing support for, or opposition to, the petition. Moreover, section 732(c)(4)(D) of the Act provides that, if the petition does not establish support of domestic producers or workers accounting for more than 50 percent of the total production of the domestic like product, Commerce shall: (i) poll the industry or rely on other information in order to determine if there is support for the petition, as required by subparagraph (A); or (ii) determine industry support using a statistically valid sampling method to poll the "industry."
[top] Section 771(4)(A) of the Act defines the "industry" as the producers as a whole of a domestic like product. Thus, to determine whether a petition has the requisite industry support, the statute directs Commerce to look to producers and workers who produce the domestic like product. The U.S. International Trade Commission (ITC), which is responsible for determining whether "the domestic industry" has been injured, must also determine what constitutes a domestic like product in order to define the industry. While both Commerce and the ITC must apply the same statutory definition regarding the
Footnotes:
13 ? See section 771(10) of the Act.
14 ? See USEC, Inc. v. United States, 132 F. Supp. 2d 1, 8 (CIT 2001) (citing Algoma Steel Corp., Ltd. v. United States, 688 F. Supp. 639, 644 (CIT 1988), aff'd 865 F.2d 240 (Fed. Cir. 1989)).
Section 771(10) of the Act defines the domestic like product as "a product which is like, or in the absence of like, most similar in characteristics and uses with, the article subject to an investigation under this title." Thus, the reference point from which the domestic like product analysis begins is "the article subject to an investigation" ( i.e., the class or kind of merchandise to be investigated, which normally will be the scope as defined in the petition).
With regard to the domestic like product, the petitioner does not offer a definition of the domestic like product distinct from the scope of the investigation. 15 Based on our analysis of the information submitted on the record, we have determined that fiberglass door panels, as defined in the scope, constitute a single domestic like product, and we have analyzed industry support in terms of that domestic like product. 16
Footnotes:
15 ? See Petition at Volume I (pages 24-35, and Exhibits I-8, I-19 through I-27, I-29, and I-31); see also First General Issues Supplement at 9-10.
16 ?For a discussion of the domestic like product analysis as applied to this case and information regarding industry support, see Checklist, "Antidumping Duty Investigation Initiation Checklist: Fiberglass Door Panels from the People's Republic of China," dated concurrently with, and hereby adopted by, this notice (China AD Initiation Checklist), at Attachment II, Analysis of Industry Support for the Antidumping and Countervailing Duty Petitions Covering Fiberglass Door Panels from the People's Republic of China (Attachment II). This checklist is on file electronically via ACCESS.
In determining whether the petitioner has standing under section 732(c)(4)(A) of the Act, we considered the industry support data contained in the Petition with reference to the domestic like product as defined in the "Scope of the Investigation," in the appendix to this notice. To establish industry support, the petitioner provided its own production of the domestic like product in 2024 and compared this to the estimated total production of the domestic like product for the entire domestic industry. 17 We relied on data provided by the petitioner for purposes of measuring industry support. 18
Footnotes:
17 ?For further discussion, see Attachment II of the China AD Initiation Checklist.
18 ? Id.
Our review of the data provided in the Petition, the First General Issues Supplement, Second General Issues Supplement, and other information readily available to Commerce indicates that the petitioner has established industry support for the Petition. 19 First, the Petition established support from domestic producers (or workers) accounting for more than 50 percent of the total production of the domestic like product and, as such, Commerce is not required to take further action in order to evaluate industry support ( e.g., polling). 20 Second, the domestic producers (or workers) have met the statutory criteria for industry support under section 732(c)(4)(A)(i) of the Act because the domestic producers (or workers) who support the Petition account for at least 25 percent of the total production of the domestic like product. 21 Finally, the domestic producers (or workers) have met the statutory criteria for industry support under section 732(c)(4)(A)(ii) of the Act because the domestic producers (or workers) who support the Petition account for more than 50 percent of the production of the domestic like product produced by that portion of the industry expressing support for, or opposition to, the Petition. 22 Accordingly, Commerce determines that the Petition were filed on behalf of the domestic industry within the meaning of section 732(b)(1) of the Act. 23
Footnotes:
19 ?For further discussion, see Attachment II of the China AD Initiation Checklist.
20 ? Id.; see also section 732(c)(4)(D) of the Act.
21 ? See Attachment II of the China AD Initiation Checklist.
22 ? Id.
23 ? Id.
Allegations and Evidence of Material Injury and Causation
The petitioner alleges that the U.S. industry producing the domestic like product is being materially injured, or is threatened with material injury, by reason of the imports of the subject merchandise sold at LTFV. In addition, the petitioner alleges that subject imports exceed the negligibility threshold provided for under section 771(24)(A) of the Act. 24
Footnotes:
24 ?For further discussion, see China AD Initiation Checklist at Attachment III, Analysis of Allegations and Evidence of Material Injury and Causation for the Antidumping and Countervailing Duty Petitions Covering Fiberglass Door Panels from the People's Republic of China.
The petitioner contends that the industry's injured condition is illustrated by a significant increase in the volume of subject imports; reduced market share; underselling and price depression and/or suppression; lost sales and revenues; declines in domestic producers' U.S. production, capacity utilization, shipments, and employment variables; adverse impact on financial performance; and the magnitude of the estimated dumping margins. 25 We assessed the allegations and supporting evidence regarding material injury, threat of material injury, causation, as well as negligibility, and we have determined that these allegations are properly supported by adequate evidence, and meet the statutory requirements for initiation. 26
Footnotes:
25 ? Id.
26 ? Id.
Allegations of Sales at LTFV
The following is a description of the allegations of sales at LTFV upon which Commerce based its decision to initiate a LTFV investigation of imports of fiberglass door panels from China. The sources of data for the deductions and adjustments relating to U.S. price and normal value (NV) are discussed in greater detail in the China AD Initiation Checklist.
U.S. Price
The petitioner based export price (EP) on pricing information for fiberglass door panels produced and sold or offered for sale in the U.S. market during the POI. 27 The petitioner made no adjustments to U.S. price to calculate the net ex-factory U.S. prices. 28
Footnotes:
27 ? See China AD Initiation Checklist.
28 ? Id.
Normal Value
Commerce considers China to be an NME country. 29 In accordance with section 771(18)(C)(i) of the Act, any determination that a foreign country is an NME country shall remain in effect until revoked by Commerce. Therefore, we continue to treat China as an NME country for purposes of the initiation of this LTFV investigation. Accordingly, we base NV on FOPs valued in a surrogate market economy country in accordance with section 773(c) of the Act.
Footnotes:
29 ? See, e.g., Certain Freight Rail Couplers and Parts Thereof from the People's Republic of China: Preliminary Affirmative Determination of Sales at Less Than Fair Value and Preliminary Affirmative Determination of Critical Circumstances, 88 FR 15372 (March 13, 2023), and accompanying Preliminary Decision Memorandum at 5, unchanged in Certain Freight Rail Couplers and Parts Thereof from the People's Republic of China: Final Affirmative Determination of Sales at Less-Than-Fair Value and Final Affirmative Determination of Critical Circumstances, 88 FR 34485 (May 30, 2023).
[top] The petitioner claims that Mexico is an appropriate surrogate country for
Footnotes:
30 ? See China AD Initiation Checklist.
31 ? Id.
Interested parties will have the opportunity to submit comments regarding surrogate country selection and, pursuant to 19 CFR 351.301(c)(3)(i), will be provided an opportunity to submit publicly available information to value FOPs within 30 days before the scheduled date of the preliminary determination.
Factors of Production
Because information regarding the volume of inputs consumed by Chinese producers/exporters was not reasonably available, the petitioner used the production experience and product-specific consumption rates of a U.S. producer of fiberglass door panels as a surrogate to value Chinese manufacturers' FOPs. 32 Additionally, for China, the petitioner calculated factory overhead, SG&A, and profit based on the experience of a Mexican producer of comparable merchandise. 33
Footnotes:
32 ? Id.
33 ? Id.
Fair Value Comparisons
Based on the data provided by the petitioner, there is reason to believe that imports of fiberglass door panels from China are being, or are likely to be, sold in the United States at LTFV. Based on comparisons of EP or NV in accordance with sections 772 and 773 of the Act, the estimated dumping margins for fiberglass door panels from China covered by this initiation range from 147.85 to 190.57 percent. 34
Footnotes:
34 ? Id.
Initiation of LTFV Investigation
Based upon the examination of the Petition and supplemental responses, we find that they meet the requirements of section 732 of the Act. Therefore, we are initiating a LTFV investigation to determine whether imports of fiberglass door panels from China are being, or are likely to be, sold in the United States at LTFV. In accordance with section 733(b)(1)(A) of the Act and 19 CFR 351.205(b)(1), unless postponed, we will make our preliminary determination no later than 140 days after the date of this initiation.
Respondent Selection
The petitioner identified 68 companies in China as producers and/or exporters of fiberglass door panels. 35 Our standard practice for respondent selection in AD investigation involving NME countries is to select respondents based on quantity and value (Q&V) questionnaires in cases where Commerce has determined that the number of companies is large, and it cannot individually examine each company based upon its resources. Therefore, considering the number of producers and/or exporters identified in the Petition, Commerce will solicit Q&V information that can serve as a basis for selecting exporters for individual examination in the event that Commerce determines that the number is large and decides to limit the number of respondents individually examined pursuant to section 777A(c)(2) of the Act. Because there are 68 Chinese producers and/or exporters identified in the Petition, Commerce has determined that it will issue Q&V questionnaires to the largest producers and/or exporters in China that are identified in the U.S. Customs and Border Protection POI entry data for which there is complete address information on the record. 36
Footnotes:
35 ? See Petition at Volume I (page 19 and Exhibit I-12); see also First General Issues Supplement at 1 and Exhibit I-Supp-1.
36 ? See Memorandum, "Release of U.S. Customs and Border Protection Entry Data," dated April 8, 2025.
Commerce will post the Q&V questionnaires along with filing instructions on Commerce's website at https://www.trade.gov/ec-adcvd-case-announcements. Producers/exporters of fiberglass door panels from China that do not receive Q&V questionnaires may still submit a response to the Q&V questionnaire and can obtain a copy of the Q&V questionnaire from Commerce's website. Responses to the Q&V questionnaire must be submitted by the relevant Chinese producers/exporters no later than 5:00 p.m. ET on April 23, 2025, which is two weeks from the signature date of this notice. All Q&V questionnaire responses must be filed electronically via ACCESS. An electronically filed document must be received successfully, in its entirety, by ACCESS no later than 5:00 p.m. ET on the deadline noted above.
Interested parties must submit applications for disclosure under administrative protective order (APO) in accordance with 19 CFR 351.305(b). As stated above, instructions for filing such applications may be found on Commerce's website at https://www.trade.gov/administrative-protective-orders.
Separate Rates
In order to obtain separate rate status in an NME investigation, exporters and producers must submit a separate rate application. The specific requirements for submitting a separate rate application in an NME investigation are outlined in detail in the application itself, which is available on Commerce's website at https://access.trade.gov/Resources/nme/nme-sep-rate.html. Note that Commerce recently promulgated new regulations pertaining to separate rates, including the separate rate application deadline and eligibility for separate rate status, in 19 CFR 351.108. 37 Pursuant to 19 CFR 351.108(d)(1), the separate rate application will be due 21 days after publication of this initiation notice. 38 Exporters and producers must file a timely separate rate application if they want to be considered for individual examination. In addition, pursuant to 19 CFR 351.108(e), exporters and producers who submit a separate rate application and have been selected as mandatory respondents will be eligible for consideration for separate rate status only if they fully respond to all parts of Commerce's AD questionnaire and participate in the LTFV proceeding as mandatory respondents. 39 Commerce requires that companies from China submit a response both to the Q&V questionnaire and to the separate rate application by the respective deadlines to receive consideration for separate rate status. Companies not filing a timely Q&V questionnaire response will not receive separate rate consideration.
Footnotes:
37 ? See Regulations Enhancing the Administration of the Antidumping and Countervailing Duty Trade Remedy Laws, 89 FR 101694, 101759-60 (December 16, 2024).
38 ? See 19 CFR 351.108(d)(1).
39 ? See 19 CFR 351.108(e).
Use of Combination Rates
Commerce will calculate combination rates for certain respondents that are eligible for a separate rate in an NME investigation. The Separate Rates and Combination Rates Bulletin states:
[top] {w}hile continuing the practice of assigning separate rates only to exporters, all separate rates that {Commerce} will now assign in its NME investigation will be specific to those producers that supplied the exporter during the period of investigation. Note, however, that one rate is calculated for the exporter and all of the producers which supplied subject merchandise to it during the period of investigation.
Footnotes:
40 ? See Enforcement and Compliance's Policy Bulletin No. 05.1, regarding, "Separate-Rates Practice and Application of Combination Rates in Antidumping Investigation involving NME Countries," (April 5, 2005), at 6 (emphasis added), available on Commerce's website at https://access.trade.gov/Resources/policy/bull05-1.pdf.
Distribution of Copies of the Petition
In accordance with section 732(b)(3)(A) of the Act and 19 CFR 351.202(f), a copy of the public version of the Petition has been provided to the Government of China via ACCESS. To the extent practicable, we will attempt to provide a copy of the public version of the Petition to each exporter named in the Petition, as provided under 19 CFR 351.203(c)(2).
ITC Notification
Commerce will notify the ITC of our initiation, as required by section 732(d) of the Act.
Preliminary Determination by the ITC
The ITC will preliminarily determine, within 45 days after the date on which the Petition were filed, whether there is a reasonable indication that imports of fiberglass door panels from China are materially injuring, or threatening material injury to, a U.S. industry. 41 A negative ITC determination will result in the investigation being terminated. 42 Otherwise, this LTFV investigation will proceed according to statutory and regulatory time limits.
Footnotes:
41 ? See section 733(a) of the Act.
42 ? Id.
Submission of Factual Information
Factual information is defined in 19 CFR 351.102(b)(21) as: (i) evidence submitted in response to questionnaires; (ii) evidence submitted in support of allegations; (iii) publicly available information to value factors under 19 CFR 351.408(c) or to measure the adequacy of remuneration under 19 CFR 351.511(a)(2); (iv) evidence placed on the record by Commerce; and (v) evidence other than factual information described in (i)-(iv). Section 351.301(b) of Commerce's regulations requires any party, when submitting factual information, to specify under which subsection of 19 CFR 351.102(b)(21) the information is being submitted? 43 and, if the information is submitted to rebut, clarify, or correct factual information already on the record, to provide an explanation identifying the information already on the record that the factual information seeks to rebut, clarify, or correct. 44 Time limits for the submission of factual information are addressed in 19 CFR 351.301, which provides specific time limits based on the type of factual information being submitted. Interested parties should review the regulations prior to submitting factual information in this investigation.
Footnotes:
43 ? See 19 CFR 351.301(b).
44 ? See 19 CFR 351.301(b)(2).
Extensions of Time Limits
Parties may request an extension of time limits before the expiration of a time limit established under 19 CFR 351.301, or as otherwise specified by Commerce. In general, an extension request will be considered untimely if it is filed after the expiration of the time limit established under 19 CFR 351.301, or as otherwise specified by Commerce. 45 For submissions that are due from multiple parties simultaneously, an extension request will be considered untimely if it is filed after 10:00 a.m. ET on the due date. Under certain circumstances, Commerce may elect to specify a different time limit by which extension requests will be considered untimely for submissions which are due from multiple parties simultaneously. In such a case, we will inform parties in a letter or memorandum of the deadline (including a specified time) by which extension requests must be filed to be considered timely. An extension request must be made in a separate, standalone submission; under limited circumstances we will grant untimely filed requests for the extension of time limits, where we determine, based on 19 CFR 351.302, that extraordinary circumstances exist. Parties should review Commerce's regulations concerning the extension of time limits and the Time Limits Final Rule prior to submitting factual information in this investigation. 46
Footnotes:
45 ? See 19 CFR 351.301; see also Extension of Time Limits; Final Rule, 78 FR 57790 (September 20, 2013) ( Time Limits Final Rule ), available at https://www.gpo.gov/fdsys/pkg/FR-2013-09-20/html/2013-22853.htm.
46 ? See 19 CFR 351.302; see also, e.g., Time Limits Final Rule.
Certification Requirements
Any party submitting factual information in an AD proceeding must certify to the accuracy and completeness of that information. 47 Parties must use the certification formats provided in 19 CFR 351.303(g). 48 Commerce intends to reject factual submissions if the submitting party does not comply with the applicable certification requirements.
Footnotes:
47 ? See section 782(b) of the Act.
48 ? See Certification of Factual Information to Import Administration During Antidumping and Countervailing Duty Proceedings, 78 FR 42678 (July 17, 2013) ( Final Rule ). Additional information regarding the Final Rule is available at https://access.trade.gov/Resources/filing/index.html.
Notification to Interested Parties
Interested parties must submit applications for disclosure under APO in accordance with 19 CFR 351.305. Parties wishing to participate in this investigation should ensure that they meet the requirements of 19 CFR 351.103(d) ( e.g., by filing the required letter of appearance). Note that Commerce has amended certain of its requirements pertaining to the service of documents in 19 CFR 351.303(f). 49
Footnotes:
49 ? See Administrative Protective Order, Service, and Other Procedures in Antidumping and Countervailing Duty Proceedings, 88 FR 67069 (September 29, 2023).
This notice is issued and published pursuant to sections 732(c)(2) and 777(i) of the Act, and 19 CFR 351.203(c).
Dated: April 9, 2025.
Christopher Abbott,
Deputy Assistant Secretary for Policy and Negotiations, performing the non-exclusive functions and duties of the Assistant Secretary for Enforcement and Compliance.
Appendix
Scope of the Investigation
[top] The merchandise covered by this investigation consists of fiberglass door panels, including fiberglass sidelites, whether finished or unfinished, whether assembled or unassembled, whether pre-hung or included in an entry door system. The subject fiberglass door panels consist of at least one fiberglass skin, frames typically made of wood or composite stiles, bottom rails, and top rails, binding materials, including adhesives or fasteners, insulation foam, and may be assembled with glass lites (glass that is ultimately installed in the fiberglass door panel). Fiberglass sidelites (or "sidelights") are typically smaller in width than fiberglass door panels, and consist of at least one fiberglass skin, frames typically made of wood or composite stiles, bottom rails, and top rails, binding materials, including adhesives or fasteners, insulation foam, and may be assembled with glass lites (glass that is ultimately installed in the fiberglass sidelite). Subject merchandise includes fiberglass door panels and sidelites
Fiberglass door panels and sidelites are covered by the investigation whether they are imported attached to, or in conjunction with door components and accessories (including but not limited to door jambs, door handles, locks, hinges, door stoppers, door kicks, door thresholds, door sills, and trim), in a pre-hung door system, or an entry door system. Subject fiberglass door panels and sidelites are covered whether or not they are accompanied by other parts. However, if a subject fiberglass door panel or sidelite is imported in a pre-hung door system or entry door system, only the fiberglass door panel and sidelite, including when assembled with glass lites or when the glass lites are shipped with the subject merchandise for further assembly, are covered by the scope. Door components and accessories (including but not limited to transoms, door jambs, door handles, locks, hinges, door stoppers, door kicks, door thresholds, door sills, and trim) are not included in the scope when imported with a fiberglass door panel or sidelite, including when such components or accessories are assembled to a fiberglass door panel or sidelite, or when imported separately. Subject merchandise may be impact-rated to withstand hurricane force wind loads and may be reinforced with steel sheet or plate. Impact-rated doors may be certified to Testing Application Standards (TAS) 201/202/203-94/and American Society for Testing and Materials (ASTM) E330-02/14/M-14, E1886-05/13a/, or E1996-09/14a.
Subject merchandise may be fire-rated for up to 90 minutes and may contain flame retardant composites, including, but not limited to flame retardant foam or mineral core materials, including but not limited to low density calcium silicate. Fire-rated doors generally satisfy the National Fire Protection Association (NFPA) 252 Standard Methods of Fire Tests of Door Assemblies and UL10(b) and (c)-Standard for Safety-Fire Tests of Door Assemblies.
Subject merchandise also includes fiberglass door panels and sidelites that have been processed in a third country, including but not limited to one or more of the following: filling with insulation foam, trimming, cutting, notching, punching, drilling, painting, finishing, assembly, or any other processing that would not otherwise remove the merchandise from the scope of the investigation if performed in the country of manufacture of the in-scope product. The inclusion of other parts, such as door components and accessories (including but not limited to door jambs, door handles, locks, hinges, door stoppers, door kicks, door thresholds, door sills, and trim) in a third country does not remove the fiberglass door panels and sidelites from the scope.
Excluded from the scope of this investigation are all products covered by the scope of the antidumping duty and countervailing duty orders on wood mouldings and millwork products from China. See Wood Mouldings and Millwork Products from the People's Republic of China: Amended Final Antidumping Duty Determination and Antidumping Duty Order, 86 FR 9486 (February 16, 2021); and Wood Mouldings and Millwork Products from the People's Republic of China: Countervailing Duty Order, 86 FR 9484 (February 16, 2021).
Excluded from the scope of this investigation are all products covered by the scope of the antidumping duty and countervailing duty proceedings on float glass products from China. See Float Glass Products from the People's Republic of China and Malaysia: Initiation of Less-Than-Fair-Value Investigations, 90 FR 1435 (January 8, 2025); and Float Glass Products from the People's Republic of China and Malaysia: Initiation of Countervailing Duty Investigations, 90 FR 1443 (January 8, 2025).
Imports of subject merchandise are classified under Harmonized Tariff Schedule of the United States (HTSUS) statistical number 3925.20.0010. Subject merchandise may also be classified under 4418.29.4000, 4418.29.8030, 4418.29.8060, or 7019.90.5150. The HTSUS subheadings are provided for convenience and customs purposes; the written description of the scope of this investigation is dispositive.
[FR Doc. 2025-06383 Filed 4-14-25; 8:45 am]
BILLING CODE 3510-DS-P