90 FR 68 pgs. 15337-15340 - Certain Corrosion-Resistant Steel Products From Canada: Preliminary Affirmative Determination of Sales at Less Than Fair Value, Postponement of Final Determination, and Extension of Provisional Measures
Type: NOTICEVolume: 90Number: 68Pages: 15337 - 15340
Pages: 15337, 15338, 15339, 15340Docket number: [A-122-871]
FR document: [FR Doc. 2025-06135 Filed 4-9-25; 8:45 am]
Agency: Commerce Department
Sub Agency: International Trade Administration
Official PDF Version: PDF Version
[top]
DEPARTMENT OF COMMERCE
International Trade Administration
[A-122-871]
Certain Corrosion-Resistant Steel Products From Canada: Preliminary Affirmative Determination of Sales at Less Than Fair Value, Postponement of Final Determination, and Extension of Provisional Measures
AGENCY:
Enforcement and Compliance, International Trade Administration, Department of Commerce.
SUMMARY:
The U.S. Department of Commerce (Commerce) preliminarily determines that certain corrosion-resistant steel products (CORE) from Canada are being, or are likely to be, sold in the United States at less than fair value (LTFV). The period of investigation (POI) is July 1, 2023, through June 30, 2024. Interested parties are invited to comment on this preliminary determination.
DATES:
Applicable April 10, 2025.
FOR FURTHER INFORMATION CONTACT:
Reginald Anadio or Benjamin Blythe, AD/CVD Operations, Office IV, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482-3166 or (202) 482-3457, respectively.
SUPPLEMENTARY INFORMATION:
Background
This preliminary determination is made in accordance with section 733(b) of the Tariff Act of 1930, as amended (the Act). Commerce published the notice of initiation of this investigation in the Federal Register on October 2, 2024. 1 On January 28, 2025, Commerce postponed the preliminary determination of this investigation until April 3, 2025. 2 For a complete description of the events that followed the initiation of this investigation, see the Preliminary Decision Memorandum. 3 A list of topics included in the Preliminary Decision Memorandum is included as Appendix II to this notice. The Preliminary Decision Memorandum is a public document and is on file electronically via Enforcement and Compliance's Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). ACCESS is available to registered users at https://access.trade.gov. In addition, a complete version of the Preliminary Decision Memorandum can be accessed directly at https://access.trade.gov/public/FRNoticesListLayout.aspx.
Footnotes:
1 ? See Certain Corrosion-Resistant Steel Products from Australia, Brazil, Canada, Mexico, the Netherlands, South Africa, Taiwan, the Republic of Türkiye, the United Arab Emirates, and the Socialist Republic of Vietnam: Initiation of Less-Than-Fair-Value Investigations, 89 FR 80196 (October 2, 2024) ( Initiation Notice ).
2 ? See Certain Corrosion-Resistant Steel Products from Australia, Brazil, Canada, Mexico, the Netherlands, South Africa, Taiwan, the Republic of Türkiye, the United Arab Emirates, and the Socialist Republic of Vietnam: Postponement of Preliminary Determinations in the Less-Than-Fair-Value Investigations, 90 FR 8260 (January 28, 2025).
3 ? See Memorandum, "Decision Memorandum for the Preliminary Affirmative Determination in the Less-Than-Fair-Value Investigation of Certain Corrosion-Resistant Steel Products from Canada" dated concurrently with, and hereby adopted by, this notice (Preliminary Decision Memorandum).
Scope of the Investigation
The product covered by this investigation is CORE from Canada. For a complete description of the scope of this investigation, see Appendix I.
Scope Comments
In accordance with the Preamble to Commerce's regulations, 4 in the Initiation Notice, Commerce set aside a period of time for parties to raise issues regarding product coverage ( i.e., scope). 5 Certain interested parties commented on the scope of the investigation as it appeared in the Initiation Notice. For a summary of the product coverage comments and rebuttal responses submitted to the record for this investigation and accompanying discussion and analysis of all comments timely received, see the Preliminary Scope Decision Memorandum. 6 Commerce is not preliminarily modifying the scope language as it appeared in the Initiation Notice. See the scope in Appendix I to this notice. In the Preliminary Scope Decision Memorandum, Commerce established the deadline for parties to submit scope case and rebuttal briefs. 7
Footnotes:
4 ? See Antidumping Duties; Countervailing Duties, Final Rule, 62 FR 27296, 27323 (May 19, 1997) ( Preamble ).
5 ? See Initiation Notic e, 89 FR at 80197.
6 ? See Memorandum, "Preliminary Scope Decision Memorandum," dated concurrently with this notice (Preliminary Scope Decision Memorandum).
7 ? Id.
Methodology
Commerce is conducting this investigation in accordance with section 731 of the Act. Commerce calculated export prices in accordance with section 772(a) of the Act and constructed export prices in accordance with section 772(b) of the Act. Commerce calculated normal value in accordance with section 773 of the Act. Furthermore, pursuant to sections 776(a) and (b) of the Act, Commerce has preliminarily relied upon facts otherwise available, with adverse inferences for Nova Steel Inc. For a full description of the methodology underlying the preliminary determination, see the Preliminary Decision Memorandum.
All-Others Rate
Sections 733(d)(1)(ii) and 735(c)(5)(A) of the Act provide that, in the preliminary determination, Commerce shall determine an estimated all-others rate for all exporters and producers not individually examined. This rate shall be an amount equal to the weighted average of the estimated weighted-average dumping margins established for exporters and producers individually investigated, excluding any zero and de minimis dumping margins, and any dumping margins determined entirely under section 776 of the Act.
Commerce has preliminarily calculated individual estimated weighted-average dumping margins for Stelco Inc. (Stelco) and ArcelorMittal Dofasco G.P. (AMD) that are not zero, de minimis, or based entirely on facts otherwise available. Thus, Commerce calculated the all-others rate by weight averaging the estimated weighted-average dumping margins that it calculated for Stelco and AMD by each company's publicly-ranged values of sales of subject merchandise during the POI. 8
Footnotes:
8 ?With two respondents under examination, Commerce normally calculates: (A) a weighted-average of the estimated weighted-average dumping margins calculated for the examined respondents; (B) a simple average of the estimated weighted-average dumping margins calculated for the examined respondents; and (C) a weighted-average of the estimated weighted-average dumping margins calculated for the examined respondents using each company's publicly-ranged U.S. sales values for the merchandise under consideration. Commerce then compares (B) and (C) to (A) and selects the rate closest to (A) as the most appropriate rate for all other producers and exporters. See, e.g., Ball Bearings and Parts Thereof from France, Germany, Italy, Japan, and the United Kingdom: Final Results of Antidumping Duty Administrative Reviews, Final Results of Changed-Circumstances Review, and Revocation of an Order in Part, 75 FR 53661, 53662 (September 1, 2010), and accompanying Issues and Decision Memorandum at Comment 1. As complete publicly ranged sales data were available, Commerce based the all-others rate on the publicly ranged sales data of the mandatory respondents. For a complete analysis of the data, see the All-Others Rate Calculation Memorandum.
Preliminary Determination
[top] Commerce preliminarily determines that the following estimated weighted-average dumping margins exist:
| Exporter/producer | Weighted-average dumping margin (percent) | Cash deposit rate (adjusted for subsidy offset(s)) (percent) |
|---|---|---|
| Stelco Inc | 5.93 | Not Applicable. |
| ArcelorMittal Dofasco G.P./ArcelorMittal Coteau-du-Lac Limited Partnership 9 | 2.31 | Not Applicable. |
| Nova Steel Inc | *?52.08 | 48.06. 10 |
| All Others | 2.60 | Not Applicable. |
| *?Based on facts available with adverse inferences. | ||
Suspension of Liquidation
Footnotes:
9 ?Commerce preliminarily determines that ArcelorMittal Dofasco G.P. and ArcelorMittal Coteau-du-Lac Limited Partnership are a single entity. See Preliminary Decision Memorandum.
10 ? See Certain Corrosion-Resistant Steel Products from Canada: Preliminary Affirmative Countervailing Duty Determination and Alignment of Final Determination With Final Antidumping Duty Determination, 90 FR 9231 (February 10, 2025), and accompanying Preliminary Decision Memorandum at 54.
In accordance with section 733(d)(2) of the Act, Commerce will direct U.S. Customs and Border Protection (CBP) to suspend liquidation of entries of subject merchandise, as described in Appendix I, entered, or withdrawn from warehouse, for consumption on or after the date of publication of this notice in the Federal Register . Further, pursuant to section 733(d)(1)(B) of the Act and 19 CFR 351.205(d), Commerce will instruct CBP to require a cash deposit equal to the estimated weighted-average dumping margin or the estimated all-others rate, as follows: (1) the cash deposit rate for the companies listed above will be equal to the company-specific estimated weighted-average dumping margins determined in this preliminary determination; (2) if the exporter is not a respondent identified above, but the producer is, then the cash deposit rate will be equal to the company-specific estimated weighted-average dumping margin established for that producer of the subject merchandise; and (3) the cash deposit rate for all other producers and exporters will be equal to the all-others estimated weighted-average dumping margin.
To determine the cash deposit rate, Commerce normally adjusts the estimated weighted-average dumping margin by the amount of domestic subsidy pass-through and export subsidies determined in a companion countervailing duty (CVD) proceeding when CVD provisional measures are in effect. Accordingly, where Commerce has made a preliminary affirmative determination for domestic subsidy pass-through or export subsidies, Commerce has offset the calculated estimated weighted-average dumping margin by the appropriate rate(s). Any such adjusted rates may be found in the "Preliminary Determination" chart of estimated weighted-average dumping margins above. Should provisional measures in the companion CVD investigation expire prior to the expiration of provisional measures in this LTFV investigation, Commerce will direct CBP to begin collecting estimated antidumping duty cash deposits unadjusted for countervailed export subsidies at the time that the provisional CVD measures expire.
These suspension of liquidation instructions will remain in effect until further notice.
Disclosure
Commerce intends to disclose its calculations and the analysis it performed to parties to the proceeding within five days of any public announcement or, if there is no public announcement, within five days of the date of publication of this notice in the Federal Register in accordance with 19 CFR 351.224(b).
Consistent with 19 CFR 351.224(e), Commerce will analyze and, if appropriate, correct any timely allegations of significant ministerial errors by amending the preliminary determination. However, consistent with 19 CFR 351.224(d), Commerce will not consider incomplete allegations that do not address the significance standard under 19 CFR 351.224(g) following the preliminary determination. Instead, Commerce will address such allegations in the final determination together with issues raised in the case briefs or other written comments.
Verification
As provided in section 782(i)(1) of the Act, Commerce intends to verify the information relied upon in making its final determination.
Public Comment
Case briefs or other written comments, excluding scope comments, may be submitted to the Assistant Secretary for Enforcement and Compliance no later than seven days after the date on which the last verification report is issued in this investigation. Rebuttal briefs, limited to issues raised in the case briefs, may be filed not later than five days after the date for filing case briefs. 11 Interested parties who submit case briefs or rebuttal briefs in this proceeding must submit: (1) a table of contents listing each issue; and (2) a table of authorities. 12
Footnotes:
11 ? See 19 CFR 351.309(d); see also Administrative Protective Order, Service, and Other Procedures in Antidumping and Countervailing Duty Proceedings, 88 FR 67069, 67077 (September 29, 2023) ( APO and Service Final Rule ).
12 ? See 19 CFR 351.309(c)(2) and (d)(2).
As provided under 19 CFR 351.309(c)(2) and (d)(2), in prior proceedings we have encouraged interested parties to provide an executive summary of their brief that should be limited to five pages total, including footnotes. In this investigation, we instead request that interested parties provide at the beginning of their briefs a public, executive summary for each issue raised in their briefs. 13 Further, we request that interested parties limit their executive summary of each issue to no more than 450 words, not including citations. We intend to use the executive summaries as the basis of the comment summaries included in the issues and decision memorandum that will accompany the final determination in this investigation. We request that interested parties include footnotes for relevant citations in the executive summary of each issue. Note that Commerce has amended certain of its requirements pertaining to the service of documents in 19 CFR 351.303(f). 14
Footnotes:
13 ?We use the term "issue" here to describe an argument that Commerce would normally address in a comment of the Issues and Decision Memorandum.
14 ? See APO and Service Final Rule.
[top] Pursuant to 19 CFR 351.310(c), interested parties who wish to request a hearing, limited to issues raised in the case and rebuttal briefs, must submit a written request to the Assistant Secretary for Enforcement and Compliance, U.S. Department of Commerce, within 30 days after the date of publication of this notice in the Federal Register . Requests should contain: (1) the party's name, address, and telephone number, (2) the number of participants and whether any participant is a foreign national, and (3)
Postponement of Final Determination and Extension of Provisional Measures
Section 735(a)(2) of the Act provides that a final determination may be postponed until not later than 135 days after the date of the publication of the preliminary determination in the Federal Register if, in the event of an affirmative preliminary determination, a request for such postponement is made by exporters who account for a significant proportion of exports of the subject merchandise, or in the event of a negative preliminary determination, a request for such postponement is made by the petitioner. Section 351.210(e)(2) of Commerce's regulations requires that a request by exporters for postponement of the final determination be accompanied by a request for extension of provisional measures from a four-month period to a period not more than six months in duration.
On March 28, 2025, pursuant to 19 CFR 351.210(e), Stelco and AMD requested that Commerce postpone the final determination and that provisional measures be extended to a period not to exceed six months. 15 In accordance with section 735(a)(2)(A) of the Act and 19 CFR 351.210(b)(2)(ii), because: (1) the preliminary determination is affirmative; (2) the requesting exporters account for a significant proportion of exports of the subject merchandise; and (3) no compelling reasons for denial exist, Commerce is postponing the final determination and extending the provisional measures from a four-month period to a period not greater than six months. Accordingly, Commerce will make its final determination no later than 135 days after the date of publication of this preliminary determination in the Federal Register .
Footnotes:
15 ? See Stelco's Letter, "Stelco's Request for Postponement of Final Antidumping Determination," dated March 28, 2025; see also AMD's Letter, "Request to Postpone Final Determination," dated March 28, 2025.
U.S. International Trade Commission Notification
In accordance with section 733(f) of the Act, Commerce will notify the U.S. International Trade Commission (ITC) of its preliminary determination. If the final determination is affirmative, the ITC will determine before the later of 120 days after the date of this preliminary determination or 45 days after the final determination whether these imports are materially injuring, or threaten material injury to, the U.S. industry.
Notification to Interested Parties
This determination is issued and published in accordance with sections 733(f) and 777(i)(1) of the Act and 19 CFR 351.205(c).
Dated: April 3, 2025.
Christopher Abbott,
Deputy Assistant Secretary for Policy and Negotiations, performing the non-exclusive functions and duties of the Assistant Secretary for Enforcement and Compliance.
Appendix I
Scope of the Investigation
The products covered by the investigation are certain flat-rolled steel products, either clad, plated, or coated with corrosion-resistant metals such as zinc, aluminum, or zinc-, aluminum-, nickel- or iron-based alloys, whether or not corrugated or painted, varnished, laminated, or coated with plastics or other non-metallic substances in addition to the metallic coating. The products covered include coils that have a width of 12.7 mm or greater, regardless of form of coil ( e.g., in successively superimposed layers, spirally oscillating, etc. ). The products covered also include products not in coils ( e.g., in straight lengths) of a thickness less than 4.75 mm and a width that is 12.7 mm or greater and that measures at least 10 times the thickness. The products covered also include products not in coils ( e.g., in straight lengths) of a thickness of 4.75 mm or more and a width exceeding 150 mm and measuring at least twice the thickness. The products described above may be rectangular, square, circular, or other shape and include products of either rectangular or non-rectangular cross-section where such cross-section is achieved subsequent to the rolling process, i.e., products which have been "worked after rolling" ( e.g., products which have been beveled or rounded at the edges).
For purposes of the width and thickness requirements referenced above:
(1) Where the nominal and actual measurements vary, a product is within the scope if application of either the nominal or actual measurement would place it within the scope based on the definitions set forth above, and
(2) where the width and thickness vary for a specific product ( e.g., the thickness of certain products with non-rectangular cross-section, the width of certain products with non-rectangular shape, etc. ), the measurement at its greatest width or thickness applies.
Steel products included in the scope of the investigation are products in which: (1) iron predominates, by weight, over each of the other contained elements; and (2) the carbon content is 2 percent or less, by weight.
Subject merchandise also includes corrosion-resistant steel that has been further processed in a third country, including but not limited to annealing, tempering, painting, varnishing, trimming, cutting, punching and/or slitting or any other processing that would not otherwise remove the merchandise from the scope of the investigation if performed in the country of manufacture of the in-scope corrosion resistant steel.
All products that meet the written physical description are within the scope of the investigation unless specifically excluded. The following products are outside of and/or specifically excluded from the scope of the investigation:
• Flat-rolled steel products either plated or coated with tin, lead, chromium, chromium oxides, both tin and lead ("terne plate") or both chromium and chromium oxides ("tin free steel"), whether or not painted, varnished or coated with plastics or other non-metallic substances in addition to the metallic coating;
• Clad products in straight lengths of 4.7625 mm or more in composite thickness and of a width which exceeds 150 mm and measures at least twice the thickness;
• Certain clad stainless flat-rolled products, which are three-layered corrosion-resistant carbon steel flat-rolled products less than 4.75 mm in composite thickness that consist of a carbon steel flat-rolled product clad on both sides with stainless steel in a 20%-60%-20% ratio; and
Also excluded from the scope of the antidumping duty investigation on corrosion resistant steel from Taiwan are any products covered by the existing antidumping duty order on corrosion-resistant steel from Taiwan. See Certain Corrosion-Resistant Steel Products from India, Italy, the People's Republic of China, the Republic of Korea and Taiwan: Amended Final Affirmative Antidumping Determination for India and Taiwan, and Antidumping Duty Orders, 81 FR 48390 (July 25, 2016); Corrosion-Resistant Steel Products from Taiwan: Notice of Third Amended Final Determination of Sales at Less Than Fair Value Pursuant to Court Decision and Partial Exclusion from Antidumping Duty Order, 88 FR 58245 (August 25, 2023).
[top] Also excluded from the scope of the antidumping duty investigation on corrosion-resistant steel from the United Arab Emirates and the antidumping duty and countervailing duty investigations on corrosion-resistant steel from the Socialist Republic of Vietnam are any products covered by the existing antidumping and countervailing duty orders on corrosion-resistant steel from the People's Republic of China and the Republic of Korea and the antidumping duty order on corrosion-resistant steel from Taiwan. See Certain Corrosion-Resistant Steel Products from India, Italy, the People's Republic of China, the Republic of Korea and Taiwan: Amended Final Affirmative Antidumping Determination for India and Taiwan, and Antidumping Duty Orders, 81 FR 48390 (July 25, 2016); see also Certain Corrosion-Resistant Steel Products from India, Italy, Republic of Korea and the People's Republic of China: Countervailing Duty Order, 81 FR 48387 (July 25, 2016). This exclusion does not apply to imports of corrosion-resistant steel that are entered, or withdrawn from warehouse, for consumption in the United States for which the relevant importer and exporter certifications have been completed
The products subject to the investigation are currently classified in the Harmonized Tariff Schedule of the United States (HTSUS) under item numbers: 7210.30.0030, 7210.30.0060, 7210.41.0000, 7210.49.0030, 7210.49.0040, 7210.49.0045, 7210.49.0091, 7210.49.0095, 7210.61.0000, 7210.69.0000, 7210.70.6030, 7210.70.6060, 7210.70.6090, 7210.90.6000, 7210.90.9000, 7212.20.0000, 7212.30.1030, 7212.30.1090, 7212.30.3000, 7212.30.5000, 7212.40.1000, 7212.40.5000, 7212.50.0000, 7212.60.0000, 7225.91.0000, 7225.92.0000, 7226.99.0110, and 7226.99.0130.
The products subject to the investigation may also enter under the following HTSUS item numbers: 7210.90.1000, 7215.90.1000, 7215.90.3000, 7215.90.5000, 7217.20.1500, 7217.30.1530, 7217.30.1560, 7217.90.1000, 7217.90.5030, 7217.90.5060, 7217.90.5090, 7225.99.0090, 7226.99.0180, 7228.60.6000, 7228.60.8000, and 7229.90.1000.
The HTSUS subheadings above are provided for convenience and customs purposes only. The written description of the scope of the investigation is dispositive.
Appendix II
List of Topics Discussed in the Preliminary Decision Memorandum
I. Summary
II. Background
III. Period of Investigation
IV. Scope Comments
V. Affiliation and Single Entity Treatment
VI. Application of Facts Available with Adverse Inferences
VII. Discussion of the Methodology
VIII. Adjustments to Cash Deposit Rates for Export Subsidies in the Companion Countervailing Duty Investigation
IX. Currency Conversion
X. Recommendation
[FR Doc. 2025-06135 Filed 4-9-25; 8:45 am]
BILLING CODE 3510-DS-P