90 FR 25 pgs. 9134-9135 - Low Melt Polyester Staple Fiber From the Republic of Korea: Final Results of Antidumping Duty Administrative Review; 2022-2023
Type: NOTICEVolume: 90Number: 25Pages: 9134 - 9135
Pages: 9134, 9135Docket number: [A-580-895]
FR document: [FR Doc. 2025-02350 Filed 2-6-25; 8:45 am]
Agency: Commerce Department
Sub Agency: International Trade Administration
Official PDF Version: PDF Version
[top]
DEPARTMENT OF COMMERCE
International Trade Administration
[A-580-895]
Low Melt Polyester Staple Fiber From the Republic of Korea: Final Results of Antidumping Duty Administrative Review; 2022-2023
AGENCY:
Enforcement and Compliance, International Trade Administration, Department of Commerce.
SUMMARY:
The U.S. Department of Commerce (Commerce) determines that Toray Advanced Materials Korea, Inc. (TAK), the sole producer and exporter subject to this administrative review, made sales of low melt polyester staple fiber (low melt PSF) from the Republic of Korea (Korea) in the United States at less than normal value (NV) during the period of review (POR), August 1, 2022, through July 31, 2023.
DATES:
Applicable February 7, 2025.
FOR FURTHER INFORMATION CONTACT:
Andrew Hart, AD/CVD Operations, Office II, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482-1058.
SUPPLEMENTARY INFORMATION:
Background
On October 1, 2024, Commerce published in the Federal Register the Preliminary Results of 2022-2023 administrative review of the antidumping duty order? 1 on low melt PSF from Korea and invited interested parties to comment. 2 On December 9, 2024, Commerce tolled the deadline to issue the final results in this administrative review by 90 days. 3 Accordingly, the deadline for these final results is now April 29, 2025. For a complete description of the events that occurred since the Preliminary Results, see the Issues and Decision Memorandum. 4 Commerce conducted this administrative review in accordance with section 751 of the Tariff Act of 1930, as amended (the Act).
Footnotes:
1 ? See Low Melt Polyester Staple Fiber from the Republic of Korea and Taiwan: Antidumping Duty Orders, 83 FR 40752 (August 16, 2018) ( Order ).
2 ? See Low Melt Polyester Staple Fiber from the Republic of Korea: Preliminary Results of Antidumping Duty Administrative Review; 2022-2023, 89 FR 79897 (October 1, 2024) ( Preliminary Results ).
3 ? See Memorandum, "Tolling of Deadlines for Antidumping and Countervailing Duty Proceedings," dated December 9, 2024.
4 ? See Memorandum, "Issues and Decision Memorandum for the Final Results of the Antidumping Duty Administrative Review; 2022-2023: Low Melt Polyester Staple Fiber from the Republic of Korea," dated concurrently with, and hereby adopted by, this notice (Issues and Decision Memorandum).
Scope of the Order
The merchandise subject to this Order is synthetic staple fibers, not carded or combed, specifically bi-component polyester fibers having a polyester fiber component that melts at a lower temperature than the other polyester fiber component (low melt PSF). For a complete description of the scope of the Order, see the Issues and Decision Memorandum.
Analysis of Comments Received
All issues raised in the case and rebuttal briefs submitted by parties in this administrative review are addressed in the Issues and Decision Memorandum and are listed in the appendix to this notice. The Issues and Decision Memorandum is a public document and is on file electronically via Enforcement and Compliance's Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). ACCESS is available to registered users at https://access.trade.gov. In addition, a complete version of the Issues and Decision Memorandum can be accessed directly at https://access.trade.gov/public/FRNoticesListLayout.aspx.
Changes Since the Preliminary Results
Based on a review of the record and comments received from interested parties regarding the Preliminary Results, and for the reasons explained in the Issues and Decision Memorandum, Commerce made certain changes to the weighted-average dumping margin calculations for TAK for the final results or review. 5
Footnotes:
5 ? See Issues and Decision Memorandum.
Final Results of the Administrative Review
As a result of this review, we determine that the following estimated weighted-average dumping margin exists for the period August 1, 2022, through July 31, 2023.
| Producer/exporter | Weighted- average dumping margin (percent) |
|---|---|
| Toray Advanced Materials Korea, Inc | 3.14 |
Disclosure
Commerce intends to disclose the calculations performed in connection with these final results of review to interested parties within five days after public announcement of the final results or, if there is no public announcement, within five days of the date of publication of the notice of final results in the Federal Register , in accordance with 19 CFR 351.224(b).
Assessment Rates
Pursuant to section 751(a)(2)(C) of the Act, and 19 CFR 351.212(b)(1), Commerce will determine, and U.S. Customs and Border Protection (CBP) shall assess, antidumping duties on all appropriate entries of subject merchandise in accordance with the final results of this review.
Pursuant to 19 CFR 351.212(b)(1), we calculated importer-specific ad valorem duty assessment rates based on the ratio of the total amount of dumping calculated for each importer's examined sales and the total entered value of those sales. Where either the respondent's weighted-average dumping margin is zero or de minimis, within the meaning of 19 CFR 351.106(c)(1), or an importer-specific rate is zero or de minimis, we will instruct CBP to liquidate the appropriate entries without regard to antidumping duties.
[top] For entries of subject merchandise during the POR produced by TAK for which it did not know that the merchandise it sold to the intermediary ( e.g., a reseller, trading company, or exporter) was destined for the United States, we will instruct CBP to liquidate unreviewed entries at the all-others rate established in the less-than-fair-value (LTFV) investigation of 16.27 percent ad valorem, 6 if there is no rate for the
Footnotes:
6 ? See Order.
Commerce intends to issue assessment instructions to CBP no earlier than 35 days after the date of publication of the final results of this review in the Federal Register . If a timely summons is filed at the U.S. Court of International Trade, the assessment instructions will direct CBP not to liquidate relevant entries until the time for parties to file a request for a statutory injunction has expired ( i.e., within 90 days of publication).
Cash Deposit Requirements
Upon publication of this notice in the Federal Register , the following cash deposit requirements will be effective for all shipments of the subject merchandise entered, or withdrawn from warehouse, for consumption on or after the date of publication, as provided by section 751(a)(2)(C) of the Act: (1) the cash deposit rate for the company subject to this review will be equal to the weighted-average dumping margin established in the final results of the review; (2) for merchandise exported by producers or exporters not covered in this review but covered in a prior completed segment of the proceeding, the cash deposit rate will continue to be the company-specific rate published in the completed segment for the most recent period; (3) if the exporter is not a firm covered in this review, a prior review, or the original LTFV investigation, but the producer has been covered in a prior completed segment of this proceeding, then the cash deposit rate will be the rate established in the completed segment for the most recent period for the producer of the merchandise; and (4) the cash deposit rate for all other manufacturers or exporters will continue to be 16.27 percent, the all-others rate established in the LTFV investigation for this proceeding. 7 These deposit requirements, when imposed, shall remain in effect until further notice.
Footnotes:
7 ? See Order, 83 FR at 40753.
Notification to Importers
This notice serves as a final reminder to importers of their responsibility under 19 CFR 351.402(f)(2) to file a certificate regarding the reimbursement of antidumping duties prior to liquidation of the relevant entries during this review period. Failure to comply with this requirement could result in Commerce's presumption that reimbursement of antidumping duties occurred and the subsequent assessment of doubled antidumping duties.
Administrative Protective Order
This notice serves as the only reminder to parties subject to an administrative protective order (APO) of their responsibility concerning the disposition of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3), which continues to govern business proprietary information in this segment of the proceeding. Timely written notification of return/destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and terms of an APO is a violation subject to sanction.
Notification to Interested Parties
We are issuing and publishing this notice in accordance with sections 751(a)(1) and 777(i) of the Act, and 19 CFR 351.221(b)(5).
Dated: January 30, 2025.
Abdelali Elouaradia,
Acting Assistant Secretary for Enforcement and Compliance.
Appendix
List of Topics Discussed in the Issues and Decision Memorandum
I. Summary
II. Background
III. Scope of the Order
IV. Changes Since the Preliminary Results
V. Discussion of the Issues
Comment 1: Whether Commerce Should Use the Total Cost of Manufacturing Figures as Reported by TAK in the Calculation of the Dumping Margin
Comment 2: Whether Commerce Should Adjust the Home Market Indirect Selling Expense Variable to Accurately Reflect the Correct Currencies
Comment 3: Whether Commerce Should Adjust the U.S. Sales Universe to Capture All Relevant Sales in this Proceeding
Comment 4: Whether Commerce Should Calculate Normal Value Net of the Reported Billing Adjustment for One Home Market Sale
VI. Recommendation
[FR Doc. 2025-02350 Filed 2-6-25; 8:45 am]
BILLING CODE 3510-DS-P