88 FR 106 pgs. 36310-36315 - Certain New Chemicals; Receipt and Status Information for April 2023

Type: NOTICEVolume: 88Number: 106Pages: 36310 - 36315
Docket number: [EPA-HQ-OPPT-2023-0061; FRL-10581-04-OCSPP]
FR document: [FR Doc. 2023-11727 Filed 6-1-23; 8:45 am]
Agency: Environmental Protection Agency
Official PDF Version:  PDF Version
Pages: 36310, 36311, 36312, 36313, 36315

[top] page 36310

ENVIRONMENTAL PROTECTION AGENCY

[EPA-HQ-OPPT-2023-0061; FRL-10581-04-OCSPP]

Certain New Chemicals; Receipt and Status Information for April 2023

AGENCY:

Environmental Protection Agency (EPA).

ACTION:

Notice.

SUMMARY:

EPA is required under the Toxic Substances Control Act (TSCA), as amended by the Frank R. Lautenberg Chemical Safety for the 21st Century Act, to make information publicly available and to publish information in the Federal Register pertaining to submissions under TSCA Section 5, including notice of receipt of a Premanufacture notice (PMN), Significant New Use Notice (SNUN) or Microbial Commercial Activity Notice (MCAN), including an amended notice or test information; an exemption application (Biotech exemption); an application for a test marketing exemption (TME), both pending and/or concluded; a notice of commencement (NOC) of manufacture (including import) for new chemical substances; and a periodic status report on new chemical substances that are currently under EPA review or have recently concluded review. This document covers the period from 4/1/2023 to 4/30/2023.

DATES:

Comments identified by the specific case number provided in this document must be received on or before July 3, 2023.

ADDRESSES:

Submit your comments, identified by docket identification (ID) number EPA-HQ-OPPT-2023-0061, through the Federal eRulemaking Portal at https://www.regulations.gov. Follow the online instructions for submitting comments. Do not submit electronically any information you consider to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. Additional instructions on commenting and visiting the docket, along with more information about dockets generally, is available at https://www.epa.gov/dockets.

FOR FURTHER INFORMATION CONTACT:

For technical information contact: Jim Rahai, Project Management and Operations Division (MC 7407M), Office of Pollution Prevention and Toxics, Environmental Protection Agency, 1200 Pennsylvania Ave. NW, Washington, DC 20460-0001; telephone number: (202) 564-8593; email address: rahai.jim@epa.gov.

For general information contact: The TSCA-Hotline, ABVI-Goodwill, 422 South Clinton Ave., Rochester, NY 14620; telephone number: (202) 554-1404; email address: TSCA-Hotline@epa.gov.

SUPPLEMENTARY INFORMATION:

I. Executive Summary

A. What action is the Agency taking?


[top] This document provides the receipt and status reports for the period from 4/01/2023 to 4/30/2023. The Agency is providing notice of receipt of PMNs, SNUNs, and MCANs (including amended notices and test information); an exemption application under 40 CFR part 725 (Biotech exemption); TMEs, both pending and/or concluded; NOCs to manufacture a new chemical substance; and a periodic status report page 36311 on new chemical substances that are currently under EPA review or have recently concluded review.

EPA is also providing information on its website about cases reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN and exemption notices received, the date of receipt, the final EPA determination on the notice, and the effective date of EPA's determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is updated on a weekly basis.

B. What is the Agency's authority for taking this action?

Under the TSCA, 15 U.S.C. 2601 et seq., a chemical substance may be either an "existing" chemical substance or a "new" chemical substance. Any chemical substance that is not on EPA's TSCA Inventory of Chemical Substances (TSCA Inventory) is classified as a "new chemical substance," while a chemical substance that is listed on the TSCA Inventory is classified as an "existing chemical substance." (See TSCA section 3(11).) For more information about the TSCA Inventory please go to: https://www.epa.gov/tsca-inventory.

Any person who intends to manufacture (including import) a new chemical substance for a non-exempt commercial purpose, or to manufacture or process a chemical substance in a non-exempt manner for a use that EPA has determined is a significant new use, is required by TSCA section 5 to provide EPA with a PMN, MCAN, or SNUN, as appropriate, before initiating the activity. EPA will review the notice, make a risk determination on the chemical substance or significant new use, and take appropriate action as described in TSCA section 5(a)(3).

TSCA section 5(h)(1) authorizes EPA to allow persons, upon application and under appropriate restrictions, to manufacture or process a new chemical substance, or a chemical substance subject to a significant new use rule (SNUR) issued under TSCA section 5(a)(2), for "test marketing" purposes, upon a showing that the manufacture, processing, distribution in commerce, use, and disposal of the chemical will not present an unreasonable risk of injury to health or the environment. This is referred to as a test marketing exemption, or TME. For more information about the requirements applicable to a new chemical go to: https://www.epa.gov/chemicals-under-tsca.

Under TSCA sections 5 and 8 and EPA regulations, EPA is required to publish in the Federal Register certain information, including notice of receipt of a PMN/SNUN/MCAN (including amended notices and test information); an exemption application under 40 CFR part 725 (biotech exemption); an application for a TME, both pending and concluded; NOCs to manufacture a new chemical substance; and a periodic status report on the new chemical substances that are currently under EPA review or have recently concluded review.

C. Does this action apply to me?

This action provides information that is directed to the public in general.

D. Does this action have any incremental economic impacts or paperwork burdens?

No.

E. What should I consider as I prepare my comments for EPA?

1. Submitting confidential business information (CBI). Do not submit this information to EPA through regulations.gov or email. Clearly mark the part or all of the information that you claim to be CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and then identify electronically within the disk or CD-ROM the specific information that is claimed as CBI. In addition to one complete version of the comment that includes information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2.

2. Tips for preparing your comments. When preparing and submitting your comments, see the commenting tips at https://www.epa.gov/dockets/commenting-epa-dockets.

II. Status Reports

In the past, EPA has published individual notices reflecting the status of TSCA section 5 filings received, pending, or concluded. In 1995, the Agency modified its approach and streamlined the information published in the Federal Register after providing notice of such changes to the public and an opportunity to comment (see the Federal Register of May 12, 1995 (60 FR 25798) (FRL-4942-7)). Since the passage of the Lautenberg amendments to TSCA in 2016, public interest in information on the status of section 5 cases under EPA review and, in particular, the final determination of such cases, has increased. In an effort to be responsive to the regulated community, the users of this information, and the general public, to comply with the requirements of TSCA, to conserve EPA resources and to streamline the process and make it more timely, EPA is providing information on its website about cases reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN and exemption notices received, the date of receipt, the final EPA determination on the notice, and the effective date of EPA's determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is updated on a weekly basis.

III. Receipt Reports

For the PMN/SNUN/MCANs that have passed an initial screening by EPA during this period, Table I provides the following information (to the extent that such information is not subject to a CBI claim) on the notices screened by EPA during this period: The EPA case number assigned to the notice that indicates whether the submission is an initial submission, or an amendment, a notation of which version was received, the date the notice was received by EPA, the submitting manufacturer ( i.e., domestic producer or importer), the potential uses identified by the manufacturer in the notice, and the chemical substance identity.


[top] As used in each of the tables in this unit, (S) indicates that the information in the table is the specific information provided by the submitter, and (G) indicates that this information in the table is generic information because the specific information provided by the submitter was claimed as CBI. Submissions which are initial submissions will not have a letter following the case number. Submissions which are amendments to previous submissions will have a case number followed by the letter "A" ( e.g., P-18-1234A). The version column designates submissions in sequence as "1", "2", "3", etc. Note that in some cases, an initial submission is not numbered as version 1; this is because earlier version(s) were rejected as incomplete or invalid submissions. Note also that future versions of the following tables may adjust slightly as the Agency works to automate population of the data in the tables. page 36312

page 36313page 36314


[top] 
Case No. Version Received date Manufacturer Use Chemical substance
P-21-0193A 6 04/13/2023 Santolubes Manufacturing, LLC (S) This product will be used in gear oils & greases, wind turbines, HX-1 (incidental food contact) lubricants and EV (Electric Vehicle) motors. It will be used by OEMs in these applications as components in finished formulations. The intended use of these products is 100% industrial and not intended for use as consumer products (S) Fatty acids, C8-10, diesters with polyethylene glycol.
P-23-0016A 2 04/18/2023 Kuraray America, Inc. (G) Additive for paints, UV inks, coatings, etc. (S) 2-Propanol, 1, 3- bis[(3- methyl- 2- buten-1-yl) oxy]-.
P-23-0088 4 03/31/2023 Integrity bio-chemical, LLC (G) Industrial Wastewater Coagulation, Mining, mineral processing (S) Glycine, reaction products with oxidized maltodextrin.
P-23-0088A 5 04/07/2023 Integrity bio-chemical, LLC (G) Mining, mineral processing, Industrial Wastewater Coagulation (S) Glycine, reaction products with oxidized maltodextrin.
P-23-0089 2 03/31/2023 Integrity bio-chemical, LLC (G) Mining, Mineral and Industrial Wastewater Processing (S) Maltodextrin, 6-[3-(dimethyl-2-propen-1-ylammonio)propyl] ether, chloride.
P-23-0089A 3 04/07/2023 Integrity bio-chemical, LLC (G) Mining, Mineral and Industrial Wastewater Processing (S) Maltodextrin, 6-[3-(dimethyl-2-propen-1-ylammonio)propyl] ether, chloride.
P-23-0090 2 03/31/2023 Integrity bio-chemical, LLC (G) Mining, mineral processing and Industrial Wastewater Coagulation (S) Dextran, 3-(dimethyl,2-propen-1-ylammonio)propyl ether, chloride.
P-23-0090A 3 04/07/2023 Integrity bio-chemical, LLC (G) Mining, mineral processing and Industrial Wastewater Coagulation (S) Dextran, 3-(dimethyl,2-propen-1-ylammonio)propyl ether, chloride
P-23-0091 2 03/31/2023 Integrity bio-chemical, LLC (G) Oil and gas, shale stabilization, Mining flocculant, Oil and gas, fines control (S) Maltodextrin, oxidized, reaction products with ethylenediamine.
P-23-0091A 3 04/07/2023 Integrity bio-chemical, LLC (G) Oil and gas, shale stabilization, Mining flocculant, Oil and gas, fines control (S) Maltodextrin, oxidized, reaction products with ethylenediamine.
P-23-0092A 3 04/18/2023 CBI (G) An additive in ink formulations (G) Maleic modified rosin polyol ester cyclic acid.
P-23-0100A 2 04/03/2023 CBI (G) Dispersion agent used in glass fiber formation (G) Amines, alkyl reaction products with acrylic acid. salts.
P-23-0101A 5 04/06/2023 CBI (G) Chemical intermediate (G) Glycerides from fermentation of genetically modified microorganism, epoxidized.
P-23-0102A 5 04/06/2023 CBI (G) Chemical component (G) Glycerides from fermentation of genetically modified microorganism.
P-23-0103A 5 04/06/2023 CBI (G) Reactant (G) Glycerides from fermentation of genetically modified microorganism, epoxidized, reaction products with ethanol.
P-23-0105 2 04/12/2023 Heebut Materials, LLC (G) Plastic and rubber additive (G) Multi-Walled Carbon Nanotube.
P-23-0107 4 04/07/2023 Cnano Technology USA, Inc (S) Lithium-Ion Battery Conductive Agent (Precursor), Liquid and Solid Products Containing MWCNT (S) Multiwalled Carbon Nanotube.
P-23-0107A 5 04/20/2023 Cnano Technology USA, Inc (S) Lithium-Ion Battery Conductive Agent (Precursor), Solid Products Containing MWCNT as a structural reinforcement, conductive stabilizer, composite & tensile strength enhancer and heat conductor, Liquid Products Containing MWCNT as a semi conductive enhancer, chemical carrier, reflectivity reducer and anticorrosion/antifouling stimulant (S) Multiwalled Carbon Nanotube.
P-23-0108 4 04/07/2023 Cnano Technology USA, Inc (S) Lithium-Ion Battery Conductive Agent (Precursor), Liquid and Solid Products Containing MWCNT (S) Multiwalled Carbon Nanotube.
P-23-0108A 5 04/20/2023 Cnano Technology USA, Inc (S) Lithium-Ion Battery Conductive Agent (Precursor), Liquid Products Containing MWCNT as a semi conductive enhancer, chemical carrier, reflectivity reducer and anticorrosion/antifouling stimulant, Solid Products Containing MWCNT as a structural reinforcement, conductive stabilizer, composite & tensile strength enhancer and heat conductor (S) Multiwalled Carbon Nanotube.
P-23-0109 3 04/07/2023 Cnano Technology USA, Inc (S) Lithium-Ion Battery Conductive Agent, Liquid and Solid Products Containing MWCNT (S) Multiwalled Carbon Nanotube.
P-23-0109A 4 04/20/2023 Cnano Technology USA, Inc (S) Lithium-Ion Battery Conductive Agent, Liquid Products Containing MWCNT as a semi conductive enhancer, chemical carrier, reflectivity reducer and anticorrosion/antifouling stimulant, Solid Products Containing MWCNT as a structural reinforcement, conductive stabilizer, composite & tensile strength enhancer and heat conductor (S) Multiwalled Carbon Nanotube.
P-23-0110 3 04/07/2023 Cnano Technology USA, Inc (S) Lithium-Ion Battery Conductive Agent, Liquid and Solid Products Containing MWCNT (S) Multiwalled Carbon Nanotube.
P-23-0110A 4 04/20/2023 Cnano Technology USA, Inc (S) Lithium-Ion Battery Conductive Agent, Liquid Products Containing MWCNT as a semi conductive enhancer, chemical carrier, reflectivity reducer and anticorrosion/antifouling stimulant, Solid Products Containing MWCNT as a structural reinforcement, conductive stabilizer, composite & tensile strength enhancer and heat conductor (S) Multiwalled Carbon Nanotube.
P-23-0111 4 04/07/2023 Cnano Technology USA, Inc (S) Lithium-Ion Battery Conductive Agent (Precursor), Liquid and Solid Products Containing MWCNT (S) Multiwalled Carbon Nanotube.
P-23-0111A 5 04/20/2023 Cnano Technology USA, Inc (S) Lithium-Ion Battery Conductive Agent (Precursor), Liquid Products Containing MWCNT as a semi conductive enhancer, chemical carrier, reflectivity reducer and anticorrosion/antifouling stimulant, Solid Products Containing MWCNT as a structural reinforcement, conductive stabilizer, composite & tensile strength enhancer and heat conductor (S) Multiwalled Carbon Nanotube.
P-23-0112 4 04/07/2023 Cnano Technology USA, Inc (S) Lithium-Ion Battery Conductive Agent, Liquid and Solid Products Containing MWCNT (S) Multiwalled Carbon Nanotube.
P-23-0112A 5 04/20/2023 Cnano Technology USA, Inc (S) Lithium-Ion Battery Conductive Agent, Liquid Products Containing MWCNT as a semi conductive enhancer, chemical carrier, reflectivity reducer and anticorrosion/antifouling stimulant, Solid Products Containing MWCNT as a structural reinforcement, conductive stabilizer, composite & tensile strength enhancer and heat conductor (S) Multiwalled Carbon Nanotube.
P-23-0113 4 04/07/2023 Cnano Technology USA, Inc (S) Lithium-Ion Battery Conductive Agent, Liquid and Solid Products Containing MWCNT (S) Multiwalled Carbon Nanotube.
P-23-0113A 5 04/20/2023 Cnano Technology USA, Inc (S) Lithium-Ion Battery Conductive Agent, Liquid Products Containing MWCNT as a semi conductive enhancer, chemical carrier, reflectivity reducer and anticorrosion/antifouling stimulant, Solid Products Containing MWCNT as a structural reinforcement, conductive stabilizer, composite & tensile strength enhancer and heat conductor (S) Multiwalled Carbon Nanotube.
P-23-0114 3 04/07/2023 Cnano Technology USA, Inc (S) Lithium-Ion Battery Conductive Agent (Precursor), Liquid and Solid Products Containing MWCNT (S) Multiwalled Carbon Nanotube.
P-23-0114A 4 04/20/2023 Cnano Technology USA, Inc (S) Lithium-Ion Battery Conductive Agent (Precursor), Liquid Products Containing MWCNT as a semi conductive enhancer, chemical carrier, reflectivity reducer and anticorrosion/antifouling stimulant, Solid Products Containing MWCNT as a structural reinforcement, conductive stabilizer, composite & tensile strength enhancer and heat conductor (S) Multiwalled Carbon Nanotube.
P-23-0115 3 04/07/2023 Cnano Technology USA, Inc (S) Lithium-Ion Battery Conductive Agent (Precursor), Liquid and Solid Products Containing MWCNT (S) Multiwalled Carbon Nanotube.
P-23-0115A 4 04/20/2023 Cnano Technology USA, Inc (S) Lithium-Ion Battery Conductive Agent (Precursor), Liquid Products Containing MWCNT as a semi conductive enhancer, chemical carrier, reflectivity reducer and anticorrosion/antifouling stimulant, Solid Products Containing MWCNT as a structural reinforcement, conductive stabilizer, composite & tensile strength enhancer and heat conductor (S) Multiwalled Carbon Nanotube.
P-23-0116 3 04/07/2023 Cnano Technology USA, Inc (S) Lithium-Ion Battery Conductive Agent, Liquid and Solid Products Containing MWCNT (S) Multiwalled Carbon Nanotube.
P-23-0116A 4 04/20/2023 Cnano Technology USA, Inc (S) Lithium-Ion Battery Conductive Agent, Liquid Products Containing MWCNT as a semi conductive enhancer, chemical carrier, reflectivity reducer and anticorrosion/antifouling stimulant, Solid Products Containing MWCNT as a structural reinforcement, conductive stabilizer, composite & tensile strength enhancer and heat conductor (S) Multiwalled Carbon Nanotube.
P-23-0120 2 04/04/2023 Ultium Cells, LLC (G) Substance for use in the manufacture of battery components (G) Cobalt lithium manganese nickel oxide, metals.
P-23-0121 2 04/04/2023 Ultium Cells, LLC (G) Substance for use in the manufacture of battery components (G) Metal cobalt lithium manganese nickel oxide, metal.
P-23-0122 2 04/04/2023 Ultium Cells, LLC (G) Substance for use in the manufacture of battery components (G) Cobalt lithium manganese nickel oxide, metals.
P-23-0124 1 03/29/2023 CBI (G) Photolithography (G) Sulfonium, tricabocyclic-, 2-heteroatom-substituted-(halocarbocyclic)carboxylate (1:1).
P-23-0125 1 04/04/2023 CBI (G) Photolithography (G) Sulfonium, tricarbocyclic-, polyfluoropolyhydro-heteroatom substituted carbomonocyclic-2-heteroatom substituted carbomonocyclic heteropolycycle-5-alkanesulfonate (1:1).
P-23-0125A 2 04/13/2023 CBI (G) Photolithography (G) Sulfonium, tricarbocyclic-, polyfluoropolyhydro-heteroatom substituted carbomonocyclic-2-heteroatom substituted carbomonocyclic heteropolycycle-5-alkanesulfonate (1:1).
P-23-0126 1 04/13/2023 CBI (G) Destructive Use (G) Alken-1-ol.
SN-22-0002A 4 04/25/2023 Eastman Chemical Company, Inc (S) Solvent in a variety of applications (S) 2-Pyrrolidinone, 1-butyl-.
SN-22-0010A 3 04/21/2023 CBI (S) Monomer chemical, reactive diluent in UV coating formulations (this is new use), Monomer or reactive diluent for 3D printing formulations. Monomer or reactive diluent in UV-inkjet and screen-printing ink formulations, Monomer or reactive diluent, additive in UV adhesive formulations (this is new use) (S) 2-Oxazolidinone, 3-ethenyl-5-methyl-.
SN-23-0002A 4 04/10/2023 CBI (S) The LCPFACs have no function or application (S) Octanoic acid, 2,2,3,3,4,4,5,5,6,6,7,7,8,8,8-pentadecafluoro-.
SN-23-0003A 4 04/10/2023 CBI (G) The LCPFACs have no function or application (S) Dodecanoic acid, 2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,12,12,12-tricosafluoro-.
SN-23-0004A 4 04/10/2023 CBI (G) The LCPFACs have no function or application (S) Nonanoic acid, 2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,9-heptadecafluoro-.
SN-23-0005A 4 04/10/2023 CBI (G) The LCPFACs have no function or application (S) Decanoic acid, 2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,10-nonadecafluoro-.
SN-23-0006A 4 04/10/2023 CBI (G) The LCPFACs have no function or application (S) Undecanoic acid, 2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,11-heneicosafluoro-.
SN-23-0008A 4 04/05/2023 CBI (G) The LCPFACs have no function or application (S) Tetradecanoic acid, 2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,12,12,13,13,14,14,14-heptacosafluoro-.
SN-23-0009A 4 04/05/2023 CBI (G) The LCPFACs have no function or application (S) Tridecanoic acid, 2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,12,12,13,13,13-pentacosafluoro-.
SN-23-0010A 4 04/05/2023 CBI (G) The LCPFACs have no function or application (S) Hexadecanoic acid, 2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,12,12,13,13,14,14,15,15,16,16,16-hentriacontafluoro-.
SN-23-0011A 4 04/05/2023 CBI (G) The LCPFACs have no function or application (S) Octadecanoic acid, 2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,12,12,13,13,14,14,15,15,16,16,17,17,18,18,18-pentatriacontafluoro-.
SN-23-0017A 3 04/05/2023 CBI (G) The LCPFACs have no function or application (S) Octanoic acid, 2,2,3,3,4,4,5,5,6,6,7,7,8,8,8-pentadecafluoro-.
SN-23-0018A 3 04/05/2023 CBI (G) The LCPFACs have no function or application (S) Nonanoic acid, 2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,9-heptadecafluoro-.
SN-23-0019A 3 04/05/2023 CBI (G) The LCPFACs have no function or application (S) Decanoic acid, 2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,10-nonadecafluoro-.
SN-23-0020A 3 04/05/2023 CBI (G) The LCPFACs have no function or application (S) Undecanoic acid, 2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,11-heneicosafluoro-.
SN-23-0021A 3 04/05/2023 CBI (G) The LCPFACs have no function or application (S) Dodecanoic acid, 2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,12,12,12-tricosafluoro-.
SN-23-0022 2 04/03/2023 Kuraray America, Inc. (G) Additive in paints, inks, coatings, etc. (S) 2-Propenoic acid, 2-methyl-, 3-methyl-3-buten-1-yl ester.
SN-23-0022A 3 04/13/2023 Kuraray America, Inc. (G) Additive in paints, inks, coatings, etc., Raw material for polymer manufacturing (S) 2-Propenoic acid, 2-methyl-, 3-methyl-3-buten-1-yl ester.
SN-23-0022A 4 04/18/2023 Kuraray America, Inc. (G) Additive in paints, inks, coatings, etc., Raw material for polymer manufacturing (S) 2-Propenoic acid, 2-methyl-, 3-methyl-3-buten-1-yl ester.


In Table II of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the NOCs that have passed an initial screening by EPA during this period: The EPA case number assigned to the NOC including whether the submission was an initial or amended submission, the date the NOC was received by EPA, the date of commencement provided by the submitter in the NOC, a notation of the type of amendment ( e.g., amendment to generic name, specific name, technical contact information, etc.) and chemical substance identity.

page 36315


[top] 
Case No. Received date Commencement date If amendment, type of amendment Chemical substance
P-04-0830 04/27/2023 04/27/2023 Amended information, relinquished CBI claims (S) Thiocyanaic acid, 3-(triethoxysily)propyl ester, reaction products with sillica.
P-09-0231 04/10/2023 04/12/2012 N (G) Modified rosin, esters with alkanols.
P-17-0295 04/03/2023 03/31/2023 N (S) (z)-1-chloro-2,3,3,3-tetrafluoropropene.
P-21-0084 03/31/2023 03/25/2023 N (G) Carbopolycycle octa-alkene, halo.
*?The term `Approved' indicates that a submission has passed a quick initial screen ensuring all required information and documents have been provided with the submission.


In Table III of this unit, EPA provides the following information (to the extent such information is not subject to a CBI claim) on the test information that has been received during this time period: The EPA case number assigned to the test information; the date the test information was received by EPA, the type of test information submitted, and chemical substance identity.

Case No. Received date Type of test information Chemical substance
P-16-0150 04/20/2023 Fish Early Life Stage Toxicity Test (OCSPP Guideline 850.1400), Mysid Chronic Toxicity Test (OCSPP Guideline 850.1350) (G) Chlorofluorocarbon.
P-16-0543 04/25/2023 Exposure Monitoring Report (G) Halogenophosphoric acid metal salt.

If you are interested in information that is not included in these tables, you may contact EPA's technical information contact or general information contact as described under FOR FURTHER INFORMATION CONTACT to access additional non-CBI information that may be available.

Authority: 15 U.S.C. 2601 et seq.

Dated: May 26, 2023.

Pamela Myrick,

Director, Project Management and Operations Division, Office of Pollution Prevention and Toxics.

[FR Doc. 2023-11727 Filed 6-1-23; 8:45 am]

BILLING CODE 6560-50-P