87 FR 240 pgs. 76610-76611 - Finished Carbon Steel Flanges From India: Final Results of Countervailing Duty Administrative Review; 2020
Type: NOTICEVolume: 87Number: 240Pages: 76610 - 76611
Pages: 76610, 76611Docket number: [C-533-872]
FR document: [FR Doc. 2022-27223 Filed 12-14-22; 8:45 am]
Agency: Commerce Department
Sub Agency: International Trade Administration
Official PDF Version: PDF Version
[top]
DEPARTMENT OF COMMERCE
International Trade Administration
[C-533-872]
Finished Carbon Steel Flanges From India: Final Results of Countervailing Duty Administrative Review; 2020
AGENCY:
Enforcement and Compliance, International Trade Administration, Department of Commerce.
SUMMARY:
The U.S. Department of Commerce (Commerce) determines that countervailable subsidies are being provided to producers and exporters of finished carbon steel flanges (flanges) from India during the period of review (POR), January 1, 2020, through December 31, 2020.
DATES:
Applicable December 15, 2022.
FOR FURTHER INFORMATION CONTACT:
James Hepburn or Preston Cox, AD/CVD Operations, Office VI, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482-1882 or (202) 482-5041, respectively.
SUPPLEMENTARY INFORMATION:
Background
On September 8, 2022, Commerce published the preliminary results of this administrative review in the Federal Register . 1 Although we invited interested parties to comment on the Preliminary Results, 2 we received no comments. Accordingly, no decision memorandum accompanies this Federal Register notice, and no changes have been made in the final results of this review. The Preliminary Results and the PDM have been adopted as the final results.
Footnotes:
1 ? See Finished Carbon Steel Flanges from India: Preliminary Results of Countervailing Duty Administrative Review; 2020, 87 FR 54963 (September 8, 2022) ( Preliminary Results ) and accompanying Preliminary Decision Memorandum (PDM).
2 ? Id. at 54964.
Scope of the Order
The merchandise covered by the scope is flanges. For a complete description of the scope, see Appendix I.
Final Results of Administrative Review
For the period January 1, 2020, through December 31, 2020, we determine that the following net subsidy rates exist:
| Company | Subsidy rate (percent ad valorem ) |
|---|---|
| Norma (India) Ltd. 3 | 4.21 |
| R.N. Gupta & Co. Ltd | 3.61 |
| Companies Not Selected for Individual Examination? 4 | 3.88 |
Disclosure
Normally, Commerce discloses to interested parties the calculations performed in connection with the final results of review within five days of a public announcement or, if there is no public announcement, within five days of the date of publication of the notice of final results in the Federal Register , in accordance with 19 CFR 351.224(b). However, because we have made no changes from the Preliminary Results, there are no calculations to disclose.
Footnotes:
3 ?In this administrative review, Commerce found the following companies to be cross-owned with Norma (India) Ltd.: USK Export Private Limited; Uma Shanker Khandelwal and Co.; and Bansidhar Chiranjilal. See Preliminary Results PDM at 6; this finding is unchanged in these final results. This rate applies to all cross-owned companies.
4 ? See Appendix II.
Assessment Rates
Consistent with section 751(a)(2)(C) of the Tariff Act of 1930, as amended (the Act) and 19 CFR 351.212(b)(2), upon completion of the administrative review, Commerce shall determine, and U.S. Customs and Border Protection (CBP) shall assess, countervailing duties on all appropriate entries covered by this review. Commerce intends to issue assessment instructions to CBP no earlier than 35 days after the publication of the final results of this review in the Federal Register . If a timely summons is filed at the U.S. Court of International Trade, the assessment instructions will direct CBP not to liquidate relevant entries until the time for parties to file a request for a statutory injunction has expired ( i.e., within 90 days of publication).
Cash Deposit Requirements
Pursuant to section 751(a)(2)(C) of the Act, Commerce also intends to instruct CBP to collect cash deposits of estimated countervailing duties in the amounts shown above for the above-listed companies for shipments of subject merchandise entered, or withdrawn from warehouse, for consumption on or after the date of publication of these final results of this administrative review. For all non-reviewed firms, we will instruct CBP to continue to collect cash deposits of estimated countervailing duties at the most recent company-specific or all-others rate applicable to the company, as appropriate. These cash deposit requirements, effective upon publication of these final results, shall remain in effect until further notice.
Administrative Protective Orders
This notice also serves as a final reminder to parties subject to an administrative protective order (APO) of their responsibility concerning the disposition of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3). Timely written notification of the return or destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and terms of an APO is a sanctionable violation.
Notification to Interested Parties
We are issuing and publishing these final results in accordance with sections 751(a)(1) and 777(i)(1) of the Act and 19 CFR 351.221(b)(5).
Dated: December 9, 2022.
Lisa W. Wang,
Assistant Secretary for Enforcement and Compliance.
Appendix I
Scope of the Order
[top] The scope of this order covers finished carbon steel flanges. Finished carbon steel flanges differ from unfinished carbon steel flanges (also known as carbon steel flange
While these finished carbon steel flanges are generally manufactured to specification ASME B16.5 or ASME B16.47 series A or series B, the scope is not limited to flanges produced under those specifications. All types of finished carbon steel flanges are included in the scope regardless of pipe size (which may or may not be expressed in inches of nominal pipe size), pressure class (usually, but not necessarily, expressed in pounds of pressure, e.g., 150, 300, 400, 600, 900, 1500, 2500, etc.), type of face ( e.g., flat face, full face, raised face, etc.), configuration ( e.g., weld neck, slip on, socket weld, lap joint, threaded, etc.), wall thickness (usually, but not necessarily, expressed in inches), normalization, or whether or not heat treated. These carbon steel flanges either meet or exceed the requirements of the ASTM A105, ASTM A694, ASTM A181, ASTM A350 and ASTM A707 standards (or comparable foreign specifications). The scope includes any flanges produced to the above-referenced ASTM standards as currently stated or as may be amended. The term "carbon steel" under this scope is steel in which:
(a) Iron predominates, by weight, over each of the other contained elements:
(b) The carbon content is 2 percent or less, by weight; and
(c) none of the elements listed below exceeds the quantity, by weight, as indicated:
(i) 0.87 percent of aluminum;
(ii) 0.0105 percent of boron;
(iii) 10.10 percent of chromium;
(iv) 1.55 percent of columbium;
(v) 3.10 percent of copper;
(vi) 0.38 percent of lead;
(vii) 3.04 percent of manganese;
(viii) 2.05 percent of molybdenum;
(ix) 20.15 percent of nickel;
(x) 1.55 percent of niobium;
(xi) 0.20 percent of nitrogen;
(xii) 0.21 percent of phosphorus;
(xiii) 3.10 percent of silicon;
(xiv) 0.21 percent of sulfur;
(xv) 1.05 percent of titanium;
(xvi) 4.06 percent of tungsten;
(xvii) 0.53 percent of vanadium; or
(xviii) 0.015 percent of zirconium.
Finished carbon steel flanges are currently classified under subheadings 7307.91.5010 and 7307.91.5050 of the Harmonized Tariff Schedule of the United States (HTSUS). They may also be entered under HTSUS subheadings 7307.91.5030 and 7307.91.5070. The HTSUS subheadings are provided for convenience and customs purposes; the written description of the scope is dispositive.
Appendix II
Companies Not Selected for Individual Examination
1. Adinath International
2. Allena Group
3. Alloyed Steel
4. Balkrishna Steel Forge Pvt. Ltd.
5. Bebitz Flanges Works Private Limited
6. C. D. Industries
7. Cetus Engineering Private Limited
8. CHW Forge
9. CHW Forge Pvt. Ltd.
10. Citizen Metal Depot
11. Corum Flange
12. DN Forge Industries
13. Echjay Forgings Limited
14. Falcon Valves and Flanges Private Limited
15. Heubach International
16. Hindon Forge Pvt. Ltd.
17. Jai Auto Pvt. Ltd.
18. Kinnari Steel Corporation
19. Mascot Metal Manufacturers
20. M F Rings and Bearing Races Ltd.
21. Munish Forge Private Limited
22. OM Exports
23. Punjab Steel Works
24. Raaj Sagar Steels
25. Ravi Ratan Metal Industries
26. R.D. Forge
27. Rolex Fittings India Pvt. Ltd.
28. Rollwell Forge Engineering Components and Flanges
29. Rollwell Forge Pvt. Ltd.
30. SHM (ShinHeung Machinery)
31. Siddhagiri Metal & Tubes
32. Sizer India
33. Steel Shape India
34. Sudhir Forgings Pvt. Ltd.
35. Tirupati Forge Pvt. Ltd.
36. Umashanker Khandelwal Forging Limited
[FR Doc. 2022-27223 Filed 12-14-22; 8:45 am]
BILLING CODE 3510-DS-P