87 FR 191 pgs. 60059-60061 - Special Conditions: Airbus Model A321neo XLR Airplane; Flight-Control Surface Awareness and Mode Annunciation

Type: RULEVolume: 87Number: 191Pages: 60059 - 60061
Docket number: [Docket No. FAA-2021-0651; Special Conditions No. 25-799-SC]
FR document: [FR Doc. 2022-21451 Filed 10-3-22; 8:45 am]
Agency: Transportation Department
Sub Agency: Federal Aviation Administration
Official PDF Version:  PDF Version
Pages: 60059, 60060, 60061

[top] page 60059

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 25

[Docket No. FAA-2021-0651; Special Conditions No. 25-799-SC]

Special Conditions: Airbus Model A321neo XLR Airplane; Flight-Control Surface Awareness and Mode Annunciation

AGENCY:

Federal Aviation Administration (FAA), DOT.

ACTION:

Final special conditions; request for comments.

SUMMARY:

These special conditions are issued for the Airbus Model A321neo XLR airplanes. The airplane will have a novel or unusual design feature when compared to the state of technology envisioned in the airworthiness standards for transport-category airplanes. This design feature is a fly-by-wire system requiring flight-control surface-position awareness and flight-control system mode-change alerting to the flight crew. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.


[top] page 60060

DATES:

This action is effective on Airbus on October 4, 2022. Send comments on or before November 18, 2022.

ADDRESSES:

Send comments identified by Docket No. FAA-2021-0651 using any of the following methods:

Federal eRegulations Portal: Go to https://www.regulations.gov/ and follow the online instructions for sending your comments electronically.

Mail: Send comments to Docket Operations, M-30, U.S. Department of Transportation (DOT), 1200 New Jersey Avenue SE, Room W12-140, West Building Ground Floor, Washington, DC 20590-0001.

Hand Delivery or Courier: Take comments to Docket Operations in Room W12-140 of the West Building Ground Floor at 1200 New Jersey Avenue SE, Washington, DC, between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays.

Fax: Fax comments to Docket Operations at 202-493-2251.

Privacy: Except for Confidential Business Information (CBI) as described in the following paragraph, and other information as described in title 14, Code of Federal Regulations (14 CFR) 11.35, the FAA will post all comments received without change to https://www.regulations.gov/, including any personal information you provide. The FAA will also post a report summarizing each substantive verbal contact received about these special conditions.

Confidential Business Information: Confidential Business Information (CBI) is commercial or financial information that is both customarily and actually treated as private by its owner. Under the Freedom of Information Act (FOIA) (5 U.S.C. 552), CBI is exempt from public disclosure. If your comments responsive to these special conditions contain commercial or financial information that is customarily treated as private, that you actually treat as private, and that is relevant or responsive to these special conditions, it is important that you clearly designate the submitted comments as CBI. Please mark each page of your submission containing CBI as "PROPIN." The FAA will treat such marked submissions as confidential under the FOIA, and the indicated comments will not be placed in the public docket of these special conditions. Send submissions containing CBI to Troy Brown, Performance and Environment Section, AIR-625, Technical Innovation Policy Branch, Policy and Innovation Division, Aircraft Certification Service, Federal Aviation Administration, 1801 S Airport Rd., Wichita, KS 67209-2190; telephone and fax 405-666-1050; email troy.a.brown@faa.gov. Comments the FAA receives, which are not specifically designated as CBI, will be placed in the public docket for these special conditions.

Docket: Background documents or comments received may be read at https://www.regulations.gov/ at any time. Follow the online instructions for accessing the docket or go to Docket Operations in Room W12-140 of the West Building Ground Floor at 1200 New Jersey Avenue SE, Washington, DC, between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays.

FOR FURTHER INFORMATION CONTACT:

Troy Brown, Performance and Environment Section, AIR-625, Technical Innovation Policy Branch, Policy and Innovation Division, Aircraft Certification Service, Federal Aviation Administration, 1801 S Airport Rd., Wichita, KS 67209-2190; telephone and fax 405-666-1050; email troy.a.brown@faa.gov.

SUPPLEMENTARY INFORMATION:

The substance of these special conditions has been published in the Federal Register for public comment in several prior instances with no substantive comments received. Therefore, the FAA finds, pursuant to §?11.38(b), that new comments are unlikely, and notice and comment prior to this publication are unnecessary.

Comments Invited

The FAA invites interested people to take part in this rulemaking by sending written comments, data, or views. The most helpful comments reference a specific portion of the special conditions, explain the reason for any recommended change, and include supporting data.

The FAA will consider all comments received by the closing date for comments. The FAA may change these special conditions based on the comments received.

Background

On September 16, 2019, Airbus applied for an amendment to Type Certificate No. A28NM to include the new Model A321neo XLR airplanes. These airplanes are twin-engine, transport-category airplanes with seating for 244 passengers and a maximum takeoff weight of 222,000 pounds.

Type Certification Basis

Under the provisions of 14 CFR 21.101, Airbus must show that the Model A321neo XLR airplanes meet the applicable provisions of the regulations listed in Type Certificate No. A28NM, or the applicable regulations in effect on the date of application for the change, except for earlier amendments as agreed upon by the FAA.

If the Administrator finds that the applicable airworthiness regulations ( e.g., 14 CFR part 25) do not contain adequate or appropriate safety standards for the Airbus Model A321neo XLR airplanes because of a novel or unusual design feature, special conditions are prescribed under the provisions of §?21.16.

Special conditions are initially applicable to the model for which they are issued. Should the type certificate for that model be amended later to include any other model that incorporates the same novel or unusual design feature, or should any other model already included on the same type certificate be modified to incorporate the same novel or unusual design feature, these special conditions would also apply to the other model under §?21.101.

In addition to the applicable airworthiness regulations and special conditions, the Airbus Model A321neo XLR airplanes must comply with the fuel-vent and exhaust-emission requirements of 14 CFR part 34, and the noise-certification requirements of 14 CFR part 36.

The FAA issues special conditions, as defined in §?11.19, in accordance with §?11.38, and they become part of the type certification basis under §?21.101.

Novel or Unusual Design Features

The Airbus Model A321neo XLR airplanes will incorporate the following novel or unusual design feature:

A fly-by-wire system requiring flight-control surface-position awareness and flight-control system mode-change alerting to the flight crew.

Discussion

With a response-command type flight-control system and no direct coupling from cockpit controller to control surface, the pilot is not aware of actual surface position utilized to fulfill the requested demand. Some unusual flight conditions, arising from atmospheric conditions, or airplane or engine failures, may result in full or nearly full surface deflection. Unless the flight crew is made aware of excessive deflection or impending control-surface limiting, piloted or auto-flight system control of the airplane might be inadvertently continued in such a manner as to cause loss of control or other unsafe stability or performance characteristics.


[top] These special conditions also address flight-control-system mode annunciation. Suitable mode page 60061 annunciation must be provided to the flightcrew for events that significantly change the operating mode of the system but do not merit the classic "failure warning."

These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

Applicability

As discussed above, these special conditions apply to Airbus Model A321neo XLR airplanes. Should Airbus apply later for a change to the type certificate to include another model incorporating the same novel or unusual design feature, the special conditions would apply to that model as well.

Conclusion

This action affects only a certain novel or unusual design feature on one model series of airplanes. It is not a rule of general applicability.

List of Subjects in 14 CFR Part 25

Aircraft, Aviation safety, Reporting and recordkeeping requirements.

Authority Citation

The authority citation for these special conditions is as follows:

Authority:

49 U.S.C. 106(f), 106(g), 40113, 44701, 44702, 44704.

The Special Conditions

Accordingly, pursuant to the authority delegated to me by the Administrator, the following special conditions are issued as part of the type certification basis for Airbus Model A321neo XLR airplanes.

In addition to the requirements of §?25.143, the following special condition applies:

1. The flight-control system must indicate to the flight crew when the primary control means is near the limit of control authority.

In addition to the requirements of §§?25.671 and 25.672, the following special condition applies:

2. If the flight-control system has multiple modes of operation, the system must alert the flight crew when the airplane enters any mode that significantly changes or degrades the normal handling or operational characteristics of the airplane.

Issued in Kansas City, Missouri, on September 28, 2022.

Patrick R. Mullen,

Manager, Technical Innovation Policy Branch, Policy and Innovation Division, Aircraft Certification Service.

[FR Doc. 2022-21451 Filed 10-3-22; 8:45 am]

BILLING CODE 4910-13-P