85 FR 243 pgs. 81982-81987 - Self-Regulatory Organizations; Investors Exchange LLC; Notice of Filing of Proposed Rule Change To Amend IEX Rule 11.510 To Reduce the Outbound Latency That Presently Applies to All Trading Messages Sent From IEX Back to Users of the Exchange
Type: NOTICEVolume: 85Number: 243Pages: 81982 - 81987
Pages: 81982, 81983, 81984, 81985, 81986, 81987Docket number: [Release No. 34-90645; File No. SR-IEX-2020-18]
FR document: [FR Doc. 2020-27726 Filed 12-16-20; 8:45 am]
Agency: Securities and Exchange Commission
Official PDF Version: PDF Version
[top]
SECURITIES AND EXCHANGE COMMISSION
[Release No. 34-90645; File No. SR-IEX-2020-18]
Self-Regulatory Organizations; Investors Exchange LLC; Notice of Filing of Proposed Rule Change To Amend IEX Rule 11.510 To Reduce the Outbound Latency That Presently Applies to All Trading Messages Sent From IEX Back to Users of the Exchange
December 11, 2020.
Pursuant to Section 19(b)(1)? 1 of the Securities Exchange Act of 1934 ("Act")? 2 and Rule 19b-4 thereunder, 3 notice is hereby given that, on December 9, 2020, the Investors Exchange LLC ("IEX" or the "Exchange") filed with the Securities and Exchange Commission ("Commission") the proposed rule change as described in Items I and II below, which Items have been prepared by the self-regulatory organization. The Commission is publishing this notice to solicit comments on the proposed rule change from interested persons.
Footnotes:
1 ?15 U.S.C.78s(b)(1).
2 ?15 U.S.C. 78a.
3 ?17 CFR 240.19b-4.
I. Self-Regulatory Organization's Statement of the Terms of Substance of the Proposed Rule Change
Pursuant to the provisions of Section 19(b)(1) under the Act, 4 and Rule 19b-4 thereunder, 5 IEX is filing with the Commission a proposed rule change to amend IEX Rule 11.510 to reduce the outbound latency that presently applies to all trading messages sent from IEX back to Users? 6 of the Exchange to include only the actual geographic distance and related network connectivity, as well as to make conforming changes to the outbound latency that applies to all trading messages sent from the IEX System? 7 to the System routing logic? 8 with respect to routable orders. The text of the proposed rule change is available at the Exchange's website at www.iextrading.com, at the principal office of the Exchange, and at the Commission's Public Reference Room.
Footnotes:
4 ?15 U.S.C. 78s(b)(1).
5 ?17 CFR 240.19b-4.
6 ? See IEX Rule 1.160(qq).
7 ? See IEX Rule 1.160(nn).
8 ? See IEX Rule 2.220(a).
II. Self-Regulatory Organization's Statement of the Purpose of, and Statutory Basis for, the Proposed Rule Change
In its filing with the Commission, the self-regulatory organization included statements concerning the purpose of and basis for the proposed rule change and discussed any comments it received on the proposed rule change. The text of these statements may be examined at the places specified in Item IV below. The self-regulatory organization has prepared summaries, set forth in Sections A, B, and C below, of the most significant aspects of such statements.
A. Self-Regulatory Organization's Statement of the Purpose of, and Statutory Basis for, the Proposed Rule Change
1. Purpose
The Exchange proposes to amend IEX Rule 11.510 to reduce the outbound latency that presently applies to all trading messages sent from the IEX System at its primary data center back to Users of the Exchange to include only the actual geographic distance and related network connectivity, as well as to make conforming changes to the outbound latency that applies to all trading messages sent from the IEX System to the System routing logic with respect to routable orders.
The Exchange is not proposing to make any changes to the additional latency that applies in a symmetrical manner to all inbound order messages ( i.e., orders, modifications or cancellations) regardless of whether such orders are to make or take liquidity. This additional latency on inbound order messages, commonly referred to as the "IEX Speedbump," continues to be a critical part of the IEX system and is designed to protect the interests of investors, brokers, and market makers that rest orders on IEX.
[top] As described in more detail below, the additional latencies that are currently applied to both inbound and
Footnotes:
9 ? See IEX Rule 1.160(s).
The Exchange also notes that no other national securities exchanges currently provide for additional latency to outbound communications. Thus, IEX does not believe that the proposed changes raise any new or novel material issues that have not already been considered by the Commission in connection with the operations of other national securities exchanges, or that Members could not readily incorporate into their trading systems.
Background
Connectivity Description
Currently, all Users, which include Members and Sponsored Participants, 10 access IEX through the Exchange-provided network interface at the IEX Point-of-Presence? 11 or "POP," located in Secaucus, New Jersey. 12 After entering through the POP, a User's electronic message sent to the System traverses the IEX "coil" which is a box containing approximately 38 miles of compactly coiled optical fiber cable. After exiting the coil, the User's message travels an additional geographic or physical distance to the System, located at the Exchange's primary data center in Weehawken, New Jersey. The time required for a message to traverse the coil combined with the physical distance (and related networking) to the System equates to an equivalent 350 microseconds of latency, referred to herein as the "inbound latency."? 13 All inbound messages ( e.g., orders to buy or sell and any modification to a previously sent open order) from any User traverse this connectivity infrastructure, including the coil, in a symmetrical manner regardless of the type of message or whether the User is seeking to buy, sell, make or take liquidity.
Footnotes:
10 ? See IEX Rule 1.160(ll).
11 ?A Point-of-Presence is the location at which customers of an exchange (or other technological system) can connect to the exchange.
12 ?Please see discussion infra with respect to the connectivity infrastructure applicable to routable orders.
13 ? See IEX Rule 11.510(b)(1).
Separately, all outbound messages from IEX back to a User ( e.g., confirmations of an execution that occurred on IEX), as well as messages from IEX's TOPS, DEEP and DROP data products? 14 (collectively "Data Products"), pass through the communication infrastructure in reverse, referred to herein as the "outbound latency."? 15
Footnotes:
14 ? See IEX Rule 11.330(a).
15 ? See IEX Rule 11.510(b)(2). IEX's backup data center, in Chicago, Illinois, which only consumes market data from the SIPs, does not have any inbound or outbound POP/coil latency, see IEX Rule 11.510 Supplementary Material .01, and is therefore unaffected by this proposed rule change.
Other incoming and outgoing messages to and from IEX are not subject to either the inbound or outbound latency. Instead, they are sent and received directly to and from the System, subject only to the latencies inherent in the geographic distances that the messages travel. These other messages include (i) incoming proprietary market data from other national securities exchanges and market data from the SIPs and (ii) outgoing messages to the SIPs (to disseminate IEX's quotation and last sale/execution information), the National Securities Clearing Corporation (to transmit executed transactions) and other national securities exchanges (to route orders for potential execution on such exchanges). In addition, all IEX Order Book? 16 processing and order executions on the IEX Order Book occur within the System and are not subject to the inbound or outbound connectivity infrastructure.
Footnotes:
16 ? See IEX Rule 1.160(p).
IEX's affiliated broker-dealer, IEX Services LLC ("IEXS"), is a Member of the Exchange and is subject to the same inbound and outbound latency as other Members, as described in IEX Rules 2.220 and 11.510. If a User sends a routable order to the Exchange for potential execution on IEX, after traversing the inbound latency (including the coil) to reach the System, it is directed to the System routing logic rather than the IEX matching engine. 17 Upon receipt of a routable order, the System routing logic may route all or a portion of the order to the IEX Order Book or to another national securities exchange. Any such orders routed to the IEX Order Book by the System routing logic are subject to an additional 350 microsecond inbound latency between the IEX routing logic and the IEX Order Book. Similarly, the IEX routing logic may only receive IEX Data Products subject to the same 350 microsecond outbound latency as other data recipients. These additional inbound and outbound latency delays place IEXS in the same position as any Member that is a third-party routing broker in reaching the IEX Order Book, receiving outbound order messages, and receiving IEX Data Products, i.e., IEXS has no speed or informational advantage compared to other Members and data recipients.
Footnotes:
17 ? See IEX Rule 11.230(b).
See IEX Rule 11.510 for a complete description of the manner in which Participants? 18 and Extranet Providers? 19 may connect to, access, and interact with the System including the applicable latencies.
Footnotes:
18 ? See IEX Rule 11.130(a).
19 ? See IEX Rule 11.130(a).
The Critical Function of the "Speedbump"
The IEX Speedbump, which applies additional latency to inbound order messages (including modifications and cancellations), is designed to enable IEX to more effectively manage and price orders resting on its book when the market moves. This is because (as described above) orders sent to IEX are delayed by 350 microseconds in reaching IEX's matching engine but IEX does not delay its own receipt of market data from other national securities exchanges and the SIPs. This approach is designed to enable IEX's matching engine to timely process price changes and to price or execute orders on the IEX Order Book at the most accurate prices possible. As the Commission noted in approval of IEX's application to operate as a national securities exchange in 2016:
[top] [T]he purpose of IEX's coil is to provide an intentional buffer that slows down incoming orders to allow IEX's matching engine to update the prices of resting "pegged" orders when away prices change to protect resting pegged orders from the possibility of adverse selection when the market moves to a new midpoint price. The allowable price of a "pegged" order will change whenever the best displayed price across all exchanges changes, but it takes time for IEX's system to receive other exchange data feeds and recalculate the price of each pegged order resting on its book. For various reasons, IEX's systems may not recalculate prices as fast as some of the fastest low-latency traders in the market are able to send orders accessing pegged orders resting on IEX at potentially "stale" prices. The Commission believes that the application of the POP/coil delay delays the ability of low-latency market participants to take a "stale"-priced resting pegged order
Footnotes:
20 ? See Securities Exchange Act Release No. 34-78101 (June 17, 2016), 81 FR 41141, 41155 (June 23, 2016) ("Exchange Approval Order").
In addition, with IEX's recent addition of its D-Limit order type, the IEX speed bump helps IEX re-price D-Limit orders in the few seconds of the day when IEX's Crumbling Quote Indicator? 21 detects that the national best bid or offer is likely to move in a direction adverse to the User of the order within two milliseconds. 22
Footnotes:
21 ? See IEX Rule 11.190(g).
22 ? See Securities Exchange Act Release No. 89686 (August 26, 2020), 85 FR 54438 (September 1, 2020) (approving SR-IEX-2019-15) ("D-Limit Approval Order").
This application of the IEX Speedbump, and the benefits therein, are distinct and different from the additional (and symmetrical) latency imposed on outbound trading messages which was designed to slightly delay news of an execution to the participants to the execution and to IEX's Data Products. The outbound latency thus enables a market participant using a serial routing technique? 23 that executes a trade on IEX to avoid potential information leakage when subsequently seeking to access liquidity on other markets before news of the IEX execution could affect resting liquidity on those markets? 24 ( e.g., potentially resulting in cancellations or re-pricing of such liquidity). Since the time of IEX's exchange approval in 2016 there have been a myriad of technology advances, including improvements in smart-order routing techniques and a reduction in SIP latencies. 25 Consequently, and as discussed more fully below and in the Statutory Basis section, IEX does not believe that the considerations that existed in 2016 necessitate continuing to impose additional latency on outbound order messages or IEX Data Products.
Footnotes:
23 ?Serial routing entails routing an order first to one exchange, and then routing whatever shares remain in the order to other exchanges.
24 ? See Exchange Approval Order, supra note 20.
25 ?The SIPs are comprised of three plans: The CTA Plan (trade data on Tapes A&B), the CQ Plan (quote data on Tapes A&B), and the UTP Plan (trade and quote data on Tape C). Since IEX's exchange launch in September 2016, the average latencies for quote messages on the SIPs has dropped from 470 µs to 19.5 µs (CQ Plan) and from 762 µs to 13.2 µs (UTP Plan); and the average latencies for trade messages on the SIPs has dropped from 320 µs to 20 µs (CTA Plan) and from 619.7 µs to 15.7 µs (UTP Plan). See "Key Operating Metrics of Tape A&B U.S. Equities Securities Information Processor (CTA SIP)," available at https://www.ctaplan.com/publicdocs/ctaplan/CTAPLAN_Processor_Metrics_3Q2020.pdf and "UTP Q3 2020-September Tape C Quote Metrics" and "September Tape C Trade Metrics," available at https://www.utpplan.com/DOC/UTP_website_Statistics_Q3-2020-September.pdf.
Proposal
The Exchange proposes to amend IEX Rule 11.510 to reduce the outbound latency that presently applies to all trading messages sent from IEX back to Users to the actual geographic distance and related network connectivity? 26 between the Exchange System and the IEX POP. As proposed, all outbound communications (including execution and other order report messages, as well as TOPS, DEEP and DROP messages) would be treated in the same manner. The Exchange estimates that removal of the coiled optical fiber would reduce the outbound latency to 37 microseconds.
Footnotes:
26 ?Ordinary course network connectivity includes switches and cabling to connect the network access point at the POP to the System.
IEX is not proposing any changes to the additional latency applied to inbound orders, cancellations or modifications from any User, regardless of making or taking liquidity or any other factors, which will maintain the symmetry of IEX's Speedbump design for all Users. Users would still be required to connect to IEX at the POP. IEXS would continue to be subject to the existing additional inbound latency when the IEX routing logic sends an order to the IEX Order Book (a total delay of 700 microseconds for inbound routable orders) but would be subject to the reduced outbound latency in receiving execution and order messages as well as IEX Data Products in the same manner as those of other Members and data recipients. Therefore, reducing the outbound latency will have no impact on IEX's ability to provide the benefits of protection from certain trading strategies when using pegged or D-Limit orders.
In addition, based on informal feedback from Members, IEX understands that a reduction in the outbound latency would enhance Members' execution and risk management processes, including with respect to hedging and re-routing, by enabling them to receive reports of IEX executions sooner than is currently the case. Moreover, IEX believes that these benefits would apply to all Members, regardless of business model, by supporting overall execution and risk management. IEX further understands that receiving execution reports closer in time to when an execution occurred would enable Members and their clearing firms to incorporate the financial and other exposure of an execution into their risk management systems and thereby enable enhanced monitoring and control of applicable risks. IEX believes that these execution and risk management benefits outweigh the concerns that previously existed regarding the risk to serial routing techniques. As the Commission has noted, current and commonplace routing techniques seek to have orders arrive and execute simultaneously across multiple venues and are able to capture liquidity across multiple venues simultaneously without signaling those executions to the market in a way that would impact prices or available liquidity. 27 As a result, IEX believes that Members and other market participants can use such routing techniques instead of serial routing techniques to avoid potential information leakage when subsequently seeking to access liquidity on other markets after an IEX execution.
Footnotes:
27 ? See D-Limit Approval Order supra note 22 at 54441-42.
IEX also believes that its Data Products would be more useful if they were not subject to the additional outbound latency so that Members can more effectively use IEX market data in their execution and risk management decisions. Additionally, IEX notes that since its exchange launch in 2016 the SIPs have materially reduced their average latencies for dissemination of quote and trade messages, as discussed above. 28 Thus, IEX believes that these reduced latencies enable some market participants to receive IEX market data messages from the SIPs before they can receive such messages on TOPS and DEEP. In these circumstances delaying IEX's Data Products effectively renders them of limited utility. Consequently, as proposed, IEX Data Products will also be subject to the reduced outbound latency.
Footnotes:
28 ? See supra note 25.
Accordingly, IEX proposes to amend IEX Rule 11.510 to reflect the changes described above as well as to streamline descriptions of the communications infrastructure for inbound and outbound latency. As proposed the changes are as follows:
[top] • Add new language to paragraph (a) to add specificity to the reference to the POP, including that it is an abbreviation for the IEX point-of-presence and that its network address is specified in the Exchange's Connectivity Manual. In addition, clarifying language is added to specify and describe the latency for inbound and outbound communications between the System and the POP, including that outbound communications from the System to the POP do not traverse the distance provided by
• Paragraph (b) would be amended to replace the current heading, "IEX POP Connectivity" with "IEX Connectivity Infrastructure" which is more descriptive of the content of the paragraph. In addition, references to "inbound POP latency" and "outbound POP latency" would each delete the word "POP" to align with the clarifying changes to paragraph (a). Further, new language would be added to reference that connectivity between the System routing logic and the Order Book and the manner in which the System routing logic may receive IEX's Data Products are described in paragraph (c).
• Subparagraphs (b)(1) and (b)(2) would each also be amended to refer to the Exchange's connectivity infrastructure rather than the POP in describing the design goals of the inbound and outbound latency. Subparagraph (b)(2) would also be amended to specify the outbound latency and to update references to the types of messages included in the parenthetical examples.
• Paragraph (c)(1) would be amended to make conforming terminology changes to those proposed for paragraph (b). In addition, new language would be added to clarify and describe how the changes to the outbound latency apply to the System routing logic.
• Paragraph (c)(2) would be amended to make conforming terminology changes to those proposed for paragraph (b). In addition, new language would be added to specify that the System routing logic may only receive IEX Data Products subject to 37 microseconds of outbound latency, equivalent to the outbound latency applicable to all other data recipients.
• Paragraph (c)(3) would be amended to make conforming terminology changes to those proposed for paragraph (b) and to delete an extra space in a cross-reference to IEX Rule 11.240(d).
• Supplementary Material .02 would be amended to make conforming terminology changes (including deleting the term "POP" from the heading) to those proposed for paragraph (b), to reference the latency for the outbound latency, and to include the inbound and outbound latencies for routable orders in the description of which latencies are impacted by force majeure events.
• Supplementary Material .03 would be amended to clarify when the outbound versus inbound latency applies to routable orders.
Implementation
The Exchange plans to implement the proposed rule change in two steps. In the first step, the Exchange would reduce the outbound latency between the System and the POP from 350 to 37 microseconds, but would retain the existing outbound latency between the System and the System routing logic. In the second step, the Exchange would reduce the outbound latency between the System and the System routing logic from 350 to 37 microseconds. The purpose of the two-step implementation is to enable the IEX technology team to focus on each part separately, thereby mitigating potential risks, in a manner consistent with standard technology best practices. IEX is choosing to reduce the outbound latency to the System routing logic in the second step to avoid giving the System routing logic any preference over other Users. The Exchange expects that there will be several days between the two steps of the implementation and will provide at least ten (10) days' notice to Members and market participants of the implementation timeline. 29
Footnotes:
29 ?After step one and before step two, all outbound communications between the System and the System routing logic will continue to be subject to an equivalent 350 microseconds of latency. Outgoing messages ( i.e., responses) from the System routing logic to Users (with respect to routable orders sent to IEX) would be subject to the proposed reduced outbound latency of 37 microseconds. Further, IEXS would be able to receive IEX Data Products subject to the same 37 microseconds of latency as other Members and data recipients.
2. Statutory Basis
The Exchange believes that the proposed rule change is consistent with Section 6(b) of the Act, 30 in general, and furthers the objectives of Section 6(b)(5), 31 in particular, in that it is designed to prevent fraudulent and manipulative acts and practices, to promote just and equitable principles of trade, to foster cooperation and coordination with persons engaged in facilitating transactions in securities, and to remove impediments to and perfect the mechanism of a free and open market and a national market system, and, in general, to protect investors and the public interest. Specifically, the Exchange believes that the proposed rule change is consistent with the protection of investors and the public interest because it is designed to enhance IEX Members' execution and risk management efforts. As described in the Purpose section, IEX believes that a reduction in the outbound latency would enhance Members' execution and risk management processes, including with respect to hedging and re-routing, by enabling them to receive reports of IEX executions sooner than is currently the case. IEX further believes that this reduction in outbound latency will enable Members and their clearing firms to incorporate the financial and other exposure related to IEX executions into their risk management systems and thereby enable enhanced monitoring and control of applicable risks. Moreover, IEX believes that these benefits would apply to all Members, regardless of the details or nature of a Member's business, by supporting overall execution and risk management. Further, IEX believes that these execution and risk management benefits outweigh the concerns that previously existed regarding the risk to serial routing techniques. As discussed in the Purpose section, and as the Commission has noted, current and commonplace routing techniques seek to have orders arrive and execute simultaneously across multiple venues and are able to capture liquidity across multiple venues simultaneously without signaling those executions to the market in a way that would impact prices or available liquidity. 32 As a result, IEX believes that Members and other market participants can use such routing techniques instead of serial routing techniques to avoid potential information leakage when subsequently seeking to access liquidity on other markets after an IEX execution.
Footnotes:
30 ?15 U.S.C. 78f(b).
31 ?15 U.S.C. 78f(b)(5).
32 ? See supra note 27.
Similarly, and as discussed in the Purpose section, IEX believes that its Data Products will be more useful for execution and risk management purposes if they are disseminated closer in time to the applicable execution or quote change. IEX believes that this is particularly true with the recent material reduction in SIP latencies, as detailed in the Purpose section.
[top] Further, the Exchange believes that the proposed rule change is consistent with the protection of investors and the public interest because it will apply to all Members in the same manner. All outbound communications will be subject to the same reduction in latency on a fair and nondiscriminatory basis. Significantly, and as discussed in the Purpose section, execution and other order messages from the System to Users will be subject to the same latency as IEX's Data Products so that the parties to an execution do not receive information regarding the execution prior to other market participants. Although the existing delay in dissemination of its Data Products was designed to enable an order sender to avoid the potential for information
Footnotes:
33 ? See supra note 22 at 54441.
Additionally, the Exchange notes that IEXS, its routing broker, will continue to be on a level playing field compared to all other Members, as it will be subject to the same outbound latency reduction, except for the few days between stages one and two of the proposed implementation. With respect to these few days, the Exchange notes that the Act generally does not prohibit an exchange from treating its affiliated routing broker in a manner that is less preferential than other Members. Moreover, use of IEXS by other Members is optional and any Member that does not want to use IEXS may use other routers to route orders to away trading centers. 34
Footnotes:
34 ? See IEX Rule 2.220(a)(3).
The Exchange also notes that no other national securities exchanges currently provide for additional latency to outbound communications. Thus, IEX does not believe that the proposed changes raise any new or novel material issues that have not already been considered by the Commission in connection with the operations of other national securities exchanges. Moreover, because the Exchange does not believe that the proposed rule change is novel, it believes that IEX Members will be readily able to accommodate the reduced outbound latency into their trading systems.
Finally, and for clarification purposes, IEX is not proposing any changes to the additional latency applied to inbound orders, cancelations, and modifications or to those communications and processes that are not subject to the inbound or outbound latency, which continue to be critical to the protection of pegged and D-Limit orders, as described above.
B. Self-Regulatory Organization's Statement on Burden on Competition
The Exchange does not believe that the proposed rule change will impose any burden on competition that is not necessary or appropriate in furtherance of the purposes of the Act. To the contrary, the proposal is designed to enable enhancement of Members' execution and risk management processes, as described in the Purpose and Statutory Basis sections.
The Exchange does not believe that the proposed rule change will impose any burden on intermarket competition that is not necessary or appropriate in furtherance of the purposes of the Act because other exchanges offer similar functionality. Moreover, the proposed rule change would benefit other exchanges because it would enable them to receive IEX's Data Products sooner than is currently the case which could correspondingly enable them to update pegged orders more quickly. Similarly, as with other Exchange Members, their outbound routing brokers would receive order messages from IEX sooner than is currently the case and could more quickly incorporate such information into any further routing decisions.
The Exchange also does not believe that the proposed rule change will impose any burden on intramarket competition because it will apply to all Members in the same manner, except for the few days between stages one and two of the proposed implementation. With respect to these few days, as noted in the Statutory Basis section, the Exchange notes that the Act generally does not prohibit an exchange from treating its affiliated routing broker in a manner that is less preferential than other Members. Moreover, use of IEXS by other Members is optional and any Member that does not want to use IEXS may use other routers to route orders to away trading centers.
C. Self-Regulatory Organization's Statement on Comments on the Proposed Rule Change Received From Members, Participants, or Others
Written comments were neither solicited nor received.
III. Date of Effectiveness of the Proposed Rule Change and Timing for Commission Action
Within 45 days of the date of publication of this notice in the Federal Register or within such longer period up to 90 days (i) as the Commission may designate if it finds such longer period to be appropriate and publishes its reasons for so finding or (ii) as to which the self-regulatory organization consents, the Commission will:
(A) By order approve or disapprove the proposed rule change, or
(B) institute proceedings to determine whether the proposed rule change should be disapproved.
IV. Solicitation of Comments
Interested persons are invited to submit written data, views, and arguments concerning the foregoing, including whether the proposed rule change is consistent with the Act. Comments may be submitted by any of the following methods:
Electronic Comments
• Use the Commission's internet comment form ( http://www.sec.gov/rules/sro.shtml ); or
• Send an email to rule-comments@sec.gov. Please include File Number SR-IEX-2020-18 on the subject line.
Paper Comments
• Send paper comments in triplicate to Secretary, Securities and Exchange Commission, 100 F Street NE, Washington, DC 20549-1090.
[top] All submissions should refer to File Number SR-IEX-2020-18. This file number should be included on the subject line if email is used. To help the Commission process and review your comments more efficiently, please use only one method. The Commission will post all comments on the Commission's internet website ( http://www.sec.gov/rules/sro.shtml ). Copies of the submission, all subsequent amendments, all written statements with respect to the proposed rule change that are filed with the Commission, and all written communications relating to the proposed rule change between the Commission and any person, other than those that may be withheld from the public in accordance with the provisions of 5 U.S.C. 552, will be available for website viewing and printing in the Commission's Public Reference Room, 100 F Street NE, Washington, DC 20549 on official business days between the hours of 10:00 a.m. and 3:00 p.m. Copies of the filing also will be available for inspection and copying at the principal office of the Exchange. All comments received will be posted without change. Persons submitting comments are cautioned that we do not redact or edit personal identifying information from comment submissions. You should submit only information that you wish to make available publicly. All submissions should refer to File Number SR-IEX-2020-18 and should
Footnotes:
35 ?17 CFR 200.30-3(a)(12).
For the Commission, by the Division of Trading and Markets, pursuant to delegated authority. 35
J. Matthew DeLesDernier,
Assistant Secretary.
[FR Doc. 2020-27726 Filed 12-16-20; 8:45 am]
BILLING CODE 8011-01-P