80 FR 79 pg. 22939 - Energy Conservation Program: Test Procedure for Pumps; Correction
Type: PRORULEVolume: 80Number: 79Page: 22939
Page: 22939Docket number: [Docket No. EERE-2013-BT-TP-0055]
FR document: [FR Doc. 2015-09566 Filed 4-23-15; 8:45 am]
Agency: Energy Department
Official PDF Version: PDF Version
[top]
DEPARTMENT OF ENERGY
10 CFR Parts 429 and 431
[Docket No. EERE-2013-BT-TP-0055]
RIN 1905-AD50
Energy Conservation Program: Test Procedure for Pumps; Correction
AGENCY:
Office of Energy Efficiency and Renewable Energy, Department of Energy.
ACTION:
Notice of proposed rulemaking and public meeting; correction.
SUMMARY:
On April 1, 2015, the U.S. Department of Energy (DOE) published in the Federal Register a notice of proposed rulemaking and public meeting for Energy Conservation Program: Test Procedure for Pumps. This document corrects terms in four equations.
DATES:
April 24, 2015.
FOR FURTHER INFORMATION CONTACT:
Ashley Armstrong, U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Building Technologies Office, EE-5B, 1000 Independence Avenue SW., Washington, DC 20585-0121. Telephone: (202) 586-6590. Email: ashley.armstrong@ee.doe.gov .
Corrections
In the Federal Register published on April 1, 2015, in FR Doc. 2015-06945, make the following corrections:
1. On page 17604: Equation (6) is corrected by removing "13.46" and adding in its place "17.80". The corrected equation reads as follows:
[Federal Register graphic "EP24AP15.017" is not available. Please view the graphic in the PDF version of this document.]
Appendix A to Subpart Y of Part 431-Uniform Test Method for the Measurement of Energy Consumption of Pumps. [Corrected]
2. On page 17645: The equation in section II.B.1.1.1 is corrected by removing "13.46" and adding in its place "17.80". The corrected equation reads as follows:
? pump,STD = -0.85 * In( Q 100 %% ) 2 - 0.38 * In( N S ) * In( Q 100 %% ) - 11.48 * In( N S ) 2 + 17.80 * In( Q 100 %% ) + 179.80 * In( N S ) - ( C - 555.6)
3. On page 17646: The equation in section III.D.1.2.1 is corrected by removing "MotorH" and adding in its place "MotorHP". The corrected equation reads as follows:
[Federal Register graphic "EP24AP15.001" is not available. Please view the graphic in the PDF version of this document.]
4. On page 17648: The equation in section V.D.1.2.1 is corrected by removing "MotorHPMotorH" and adding in its place "MotorHP". The corrected equation reads as follows:
[Federal Register graphic "EP24AP15.002" is not available. Please view the graphic in the PDF version of this document.]
Issued in Washington, DC, on April 20, 2015.
Kathleen B. Hogan,
Deputy Assistant Secretary for Energy Efficiency, Energy Efficiency and Renewable Energy.
[FR Doc. 2015-09566 Filed 4-23-15; 8:45 am]
BILLING CODE 6450-01-P