78 FR 34 pgs. 11871-11877 - Certain New Chemicals; Receipt and Status Information
Type: NOTICEVolume: 78Number: 34Pages: 11871 - 11877
Docket number: [EPA-HQ-OPPT-2013-0053; FRL-9377-4]
FR document: [FR Doc. 2013-03765 Filed 2-19-13; 8:45 am]
Agency: Environmental Protection Agency
Official PDF Version: PDF Version
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2013-0053; FRL-9377-4]
Certain New Chemicals; Receipt and Status Information
AGENCY:
Environmental Protection Agency (EPA).
ACTION:
Notice.
SUMMARY:
The Toxic Substances Control Act (TSCA) requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Chemical Substances Inventory (TSCA Inventory)) to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. In addition under TSCA, EPA is required to publish in the Federal Register a notice of receipt of a premanufacture notice (PMN) or an application for a test marketing exemption (TME), and to publish in the Federal Register periodic status reports on the new chemicals under review and the receipt of notices of commencement (NOC) to manufacture those chemicals. This document, which covers the period from December 1, 2012 to January 11, 2013, and provides the required notice and status report, consists of the PMNs and TME, both pending or expired, and the NOC to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.
DATES:
Comments identified by the specific PMN number or TME number, must be received on or before March 22, 2013.
ADDRESSES:
Submit your comments, identified by docket identification (ID) number EPA-HQ-OPPT-2013-0053, and the specific PMN number or TME number for the chemical related to your comment, by one of the following methods:
• Federal eRulemaking Portal: http://www.regulations.gov. Follow the online instructions for submitting comments.
• Mail: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave. NW., Washington, DC 20460-0001.
• Hand Delivery: OPPT Document Control Office (DCO), EPA East Bldg., Rm. 6428, 1201 Constitution Ave. NW., Washington, DC. The DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number for the DCO is (202) 564-8930. Such deliveries are only accepted during the DCO's normal hours of operation, and special arrangements should be made for deliveries of boxed information.
Instructions: EPA's policy is that all comments received will be included in the docket without change and may be made available online at http://www.regulations.gov, including any personal information provided, unless the comment includes information claimed to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. Do not submit information that you consider to be CBI or otherwise protected through regulations.gov or email. The regulations.gov Web site is an "anonymous access" system, which means EPA will not know your identity or contact information unless you provide it in the body of your comment. If you send an email comment directly to EPA without going through regulations.gov, your email address will be automatically captured and included as part of the comment that is placed in the docket and made available on the Internet. If you submit an electronic comment, EPA recommends that you include your name and other contact information in the body of your comment and with any disk or CD-ROM you submit. If EPA cannot read your comment due to technical difficulties and cannot contact you for clarification, EPA may not be able to consider your comment. Electronic files should avoid the use of special characters, any form of encryption, and be free of any defects or viruses.
Docket: All documents in the docket are listed in the docket index available at http://www.regulations.gov. Although listed in the index, some information is not publicly available, e.g., CBI or other information whose disclosure is restricted by statute. Certain other material, such as copyrighted material, will be publicly available only in hard copy. Publicly available docket materials are available electronically at http://www.regulations.gov, or, if only available in hard copy, at the OPPT Docket. The OPPT Docket is located in the EPA Docket Center (EPA/DC) at Rm. 3334, EPA West Bldg., 1301 Constitution Ave. NW., Washington, DC. The EPA/DC Public Reading Room hours of operation are 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding legal holidays. The telephone number of the EPA/DC Public Reading Room is (202) 566-1744, and the telephone number for the OPPT Docket is (202) 566-0280. Docket visitors are required to show photographic identification, pass through a metal detector, and sign the EPA visitor log. All visitor bags are processed through an X-ray machine and subject to search. Visitors will be provided an EPA/DC badge that must be visible at all times in the building and returned upon departure.
FOR FURTHER INFORMATION CONTACT:
For technical information contact: Bernice Mudd, Information Management Division, Records Docket Management Division (7407M), Office of Pollution Prevention and Toxics, Environmental Protection Agency, 1200 Pennsylvania Ave. NW., Washington, DC 20460-0001; telephone number: (202) 564-8951; fax number: (202) 564-8955; email address: mudd.bernice@epa.gov.
For general information contact: The TSCA-Hotline, ABVI-Goodwill, 422 South Clinton Ave., Rochester, NY 14620; telephone number: (202) 554-1404; email address: TSCA-Hotline@epa.gov.
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this action apply to me?
This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitter of the PMNs addressed in this action.
B. What should I consider as I prepare my comments for EPA?
1. Submitting CBI. Do not submit this information to EPA through regulations.gov or email. Clearly mark the part or all of the information that you claim to be CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and then identify electronically within the disk or CD-ROM the specific information that is claimed as CBI. In addition to one complete version of the comment that includes information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2.
2. Tips for preparing your comments. When submitting comments, remember to:
i. Identify the document by docket ID number and other identifying information (subject heading, Federal Register date and page number).
ii. Follow directions. The Agency may ask you to respond to specific questions or organize comments by referencing a Code of Federal Regulations (CFR) part or section number.
iii. Explain why you agree or disagree; suggest alternatives and substitute language for your requested changes.
iv. Describe any assumptions and provide any technical information and/or data that you used.
v. If you estimate potential costs or burdens, explain how you arrived at your estimate in sufficient detail to allow for it to be reproduced.
vi. Provide specific examples to illustrate your concerns and suggest alternatives.
vii. Explain your views as clearly as possible, avoiding the use of profanity or personal threats.
viii. Make sure to submit your comments by the comment period deadline identified.
II. Why is EPA taking this action?
EPA classifies a chemical substance as either an "existing" chemical or a "new" chemical. Any chemical substance that is not on EPA's TSCA Inventory is classified as a "new chemical," while those that are on the TSCA Inventory are classified as an "existing chemical." For more information about the TSCA Inventory go to: http://www.epa.gov/opptintr/newchems/pubs/inventory.htm. Anyone who plans to manufacture or import a new chemical substance for a non-exempt commercial purpose is required by TSCA section 5 to provide EPA with a PMN, before initiating the activity. Section 5(h)(1) of TSCA authorizes EPA to allow persons, upon application, to manufacture (includes import) or process a new chemical substance, or a chemical substance subject to a significant new use rule (SNUR) issued under TSCA section 5(a), for "test marketing" purposes, which is referred to as a test marketing exemption, or TME. For more information about the requirements applicable to a new chemical go to: http://www.epa.gov/oppt/newchems.
Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish in the Federal Register a notice of receipt of a PMN or an application for a TME and to publish in the Federal Register periodic status reports on the new chemicals under review and the receipt of NOCs to manufacture those chemicals. This status report, which covers the period from December 1, 2012 to January 11,2013, consists of the PMNs and TME, both pending or expired, and the NOCs to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.
III. Receipt and Status Reports
In Table I. of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the PMNs received by EPA during this period: The EPA case number assigned to the PMN, the date the PMN was received by EPA, the projected end date for EPA's review of the PMN, the submitting manufacturer/importer, the potential uses identified by the manufacturer/importer in the PMN, and the chemical identity.
| Case no. | Received date | Projected notice end date | Manufacturer/ importer | Use | Chemical |
|---|---|---|---|---|---|
| P-13-0142 | 11/30/2012 | 2/27/2013 | Scott Bader, Inc | (G) Fabrication of composite articles | (G) Unsaturated urethane methacrylate |
| P-13-0143 | 11/30/2012 | 2/27/2013 | Dover Chemical Corporation | (G) Water emulsifier | (G) Polyalkylene acid, alkanol amine derivative |
| P-13-0144 | 12/3/2012 | 3/2/2013 | CBI | (G) Additive (generally 2-20% of the coating formulation) to enhance adhesion and gloss. | (G) polymer of substituted sulfonamide & didlycidylether |
| P-13-0145 | 12/3/2012 | 3/2/2013 | Corsitech | (G) Fuel additive-destructive use | (G) 2,5-furandione, polymer with alkene and alkyldiamine |
| P-13-0146 | 12/4/2012 | 3/3/2013 | CBI | (S) Acrylic resin used in the manufacture of ultra violet curable inks and coatings | (G) Aromatic urethane acrylate composed of aliphatic glycol, aliphatic ester, aliphatic acid and aromatic isocyanate |
| P-13-0147 | 12/5/2012 | 3/4/2013 | Sika Corporation | (G) Hardener for roofing adhesive | (G) Latent hardener for polyurethane |
| P-13-0148 | 12/5/2012 | 3/4/2013 | CBI | (G) Crosslinker for radiation cured coatings | (G) Urethane acrylate |
| P-13-0149 | 12/5/2012 | 3/4/2013 | Ashland, Inc | (G) Monomer for use in manufacturing polymers | (G) Substituted hydroxyalkyl methacrylate |
| P-13-0150 | 12/6/2012 | 3/5/2013 | CBI | (G) Reactant in polymer synthesis | (G) Aluminoxanes, alkyl, reaction products with dichloro substituted alkanediyl substituted heteropolycycle alkyl biphneyl zirconium and silica complex |
| P-13-0151 | 12/6/2012 | 3/5/2013 | CBI | (G) Chemical intermediate | (G) Vegetable oil based polyol polyester |
| P-13-0152 | 12/7/2012 | 3/6/2013 | CBI | (G) Contained use | (G) Metal, substituted heteropolycyclic |
| P-13-0153 | 12/7/2012 | 3/6/2013 | CBI | (G) Destructive and contained use | (G) Aromatic hydrocarbon |
| P-13-0154 | 12/7/2012 | 3/6/2013 | CBI | (G) Destructive use | (G) Substituted carbomonocycle boron salt |
| P-13-0155 | 12/7/2012 | 3/6/2013 | CBI | (G) Contained use | (G) Substituted carbomonocycle derivative metal |
| P-13-0156 | 12/7/2012 | 3/6/2013 | CBI | (G) Acrylic emulsion for waterborne exterior coatings | (G) Alkyl methacrylate polymer with alkyl acrylate, amino acrylate and alkyl methacrylate |
| P-13-0157 | 12/7/2012 | 3/6/2013 | CBI | (G) Acrylic emulsion for waterborne exterior coatings | (G) Acidic methacrylate polymer with alkyl methyacrylate, alkyl acrylate, amino acrylate and alkyl methacrylate |
| P-13-0158 | 12/7/2012 | 3/6/2013 | CBI | (G) Acrylic emulsion for waterborne exterior coatings | (G) Acidic methacrylate polymer with alkyl methyacrylate, alkyl acrylate, amino acrylate, alkyl methacrylate, ammonium salt |
| P-13-0159 | 12/7/2012 | 3/6/2013 | CBI | (G) Acrylic emulsion for waterborne exterior coatings | (G) Alkyl methacrylate polymer with alkyl acrylate, amino acrylate, alkyl hydroxy methacrylate, hydroxy alkyl methacrylate and alkyl methacrylate |
| P-13-0160 | 12/7/2012 | 3/6/2013 | CBI | (G) Acrylic emulsion for waterborne exterior coatings | (G) Acidic methacrylate polymer with alkyl methacrylate, alkyl acrylate, amino acrylate, hydroxy alkyl methacrylate, and alkyl methacrylate |
| P-13-0161 | 12/7/2012 | 3/6/2013 | CBI | (G) Acrylic emulsion for waterborne exterior coatings | (G) Acidic methacrylate polymer with alkyl methacrylate, alkyl acrylate, amino acrylate, hydroxy alkyl methacrylate, alkyl methacrylate, ammonium salt |
| P-13-0162 | 12/7/2012 | 3/6/2013 | Univation Technologies, LLC | (G) Catalyst in polymer synthesis | (G) Substituted cyclopentadienyl silico aluminoxanes |
| P-13-0163 | 12/10/2012 | 3/9/2013 | CBI | (S) Textile finishing resin & industrial water-based ink vehicle | (G) Alkyldioic acid, polymer with [(2-Aminoalkyl)amino]alkylsulfonic acid monosodium salt. alkyldiol, alkyldiol, cycloaliphatic diisocyanate and cycloaliphatic diisocyanate, polyalkylene glycol mono-alkyl ether-blocked |
| P-13-0164 | 12/10/2012 | 3/9/2013 | CBI | (G) Chemical intermediate | (G) Benzotriazole derivative |
| P-13-0165 | 12/10/2012 | 3/9/2013 | CBI | (G) Paint component | (G) Organic derivative of hydrotalcite |
| P-13-0166 | 12/11/2012 | 3/10/2013 | CBI | (G) Electronic industry contained use | (G) Carbopolycyclic |
| P-13-0167 | 12/11/2012 | 3/10/2013 | Sika Corporation | (G) Roof membrane hardener | (G) Roofing adhesive |
| P-13-0168 | 12/12/2012 | 3/11/2013 | CBI | (S) Reactant for a lubricant additive | (G) Alkylphenol |
| P-13-0169 | 12/12/2012 | 3/11/2013 | CBI | (G) Lubricant additive | (G) Sulfurized fatty acid derivative |
| P-13-0170 | 12/12/2012 | 3/11/2013 | Amfine Chemical Corporation | (G) Plastic additive | (G) Phosphoric acid, mixed esters |
| P-13-0171 | 12/13/2012 | 3/12/2013 | Dow Chemical U.S.A. | (G) Polymer used for adhesive formuation | (G) Silanated urethane polymer |
| P-13-0172 | 12/13/2012 | 3/12/2013 | Dow Chemical U.S.A. | (G) Polymer used for adhesive formuation | (G) Silanated urethane polymer |
| P-13-0173 | 12/14/2012 | 3/13/2013 | CBI | (G) Chemical intermediate | (G) Alkenoic acid ester |
| P-13-0174 | 12/17/2012 | 3/16/2013 | Cytec Industries, Inc. | (S) Resin for ultra violet cured ink formulations | (G) Substituted carbomoncycles, polymer with alkyldiol |
| P-13-0175 | 12/18/2012 | 3/17/2013 | CBI | (S) Use as a coating additive in paper and paperboard to impart grease, alcohol, and solvent resistance | (G) Perfluoro epoxide copolymer |
| P-13-0176 | 12/18/2012 | 3/17/2013 | CBI | (S) Intermediate for use in the manufacture of a polymer | (G) Fluorinated oxirane polymer |
| P-13-0177 | 12/18/2012 | 3/17/2013 | DIC International (USA), LLC | (G) A polymer component of industrial paint for coating/spray coating building materials, automotive materials and aero materials | (G) Polyxiloxane acrylic resin |
| P-13-0178 | 12/18/2012 | 3/17/2013 | Mane, USA | (S) Fragrance in a fine fragrance; fragrance in a cosmetic product; fragrance in non cosmetic products | (S) Cyclopentanol, 2-methyl-5-(1-methylethyl)- , 1-propanoate |
| P-13-0179 | 12/19/2012 | 3/18/2013 | CBI | (G) The notified substance, nppt, is a new urea fertiliser additive that temporarily retards the enzymatic breakdown of urea by inhibition of urease. This provides an effective means of managing losses of nitrogen in the form of ammonia from surface-applied urea containing fertilizers | (G) Alkyl-substituted thiophosphoric acid triamide |
| P-13-0180 | 12/19/2012 | 3/18/2013 | CBI | (S) Adhesion promoter for use in aphalt applications; emulsifier for use in asphalt applications | (G) Fatty acid amide |
| P-13-0181 | 12/19/2012 | 3/18/2013 | CBI | (S) Adhesion promoter for use in aphalt applications; emulsifier for use in asphalt applications | (G) Fatty acid amide |
| P-13-0182 | 12/19/2012 | 3/18/2013 | CBI | (S) Adhesion promoter for use in aphalt applications; emulsifier for use in asphalt applications | (G) Fatty acid amide |
| P-13-0183 | 12/19/2012 | 3/18/2013 | CBI | (S) Adhesion promoter for use in aphalt applications; emulsifier for use in asphalt applications | (G) Fatty acid amide |
| P-13-0184 | 12/19/2012 | 3/18/2013 | CBI | (S) Adhesion promoter for use in aphalt applications; emulsifier for use in asphalt applications | (G) Fatty acid amide |
| P-13-0185 | 12/19/2012 | 3/18/2013 | CBI | (S) Adhesion promoter for use in aphalt applications; emulsifier for use in asphalt applications | (G) Fatty acid amide |
| P-13-0186 | 12/19/2012 | 3/18/2013 | CBI | (G) Lubricant additive | (G) Substituted 2,5-pyrrolidinedione, alkyl derivates |
| P-13-0187 | 12/18/2012 | 3/17/2013 | CBI | (G) Industrial feedstock chemical | (G) Algal biomass from a fermentation |
| P-13-0188 | 12/21/2012 | 3/20/2013 | Colonial Chemical, Inc. | (S) Fire-fighting foams | (S) Siloxanes and silicones, di-me, 3-hydroxypropyl me, ethoxylated, ethers with oligomeric C 10-16 -alkyl D-glycopyranosides and oligomeric decyl octyl D-glycopyranosides and oligomeric decyl octyl D-glycopryanosides |
| P-13-0189 | 12/23/2012 | 3/22/2013 | CBI | (S) Intermediate for use in the manufacture of polymers | (G) Depolymerized waste plastics |
| P-13-0190 | 12/26/2012 | 3/25/2013 | CBI | (G) Pigment formulation additive | (G) 2-Oxepanone, homopolymer, ester with -alkyl-hydroxypoly (oxy-1,2-ethanediyl), phosphate |
| P-13-0191 | 12/28/2012 | 3/27/2013 | Zeon Chemicals, L.P. | (S) Rubber compounds | (G) alicyclic hydrocarbon resin |
| P-13-0192 | 12/28/2012 | 3/27/2013 | Zeon Chemicals, L.P. | (S) Rubber compounds | (S) 4, 7-methano-1 H -indene, 3a, 4, 7, 7a-tetrahydro-, polymer with 2-methyl-1, 3-butadiene and 5-(1-methylethenyl)bicyclo[2.2.2.1]hept-2-ene |
| P-13-0193 | 1/2/2013 | 4/1/2013 | Sika Corporation | (G) Hardener for roofing adhesive | (G) Amine adduct |
| P-13-0194 | 1/3/2013 | 4/2/2013 | CBI | (G) Coupling agent & film former | (G) Silylated polyazamide |
| P-13-0195 | 1/3/2013 | 4/2/2013 | Praxair Specialty Ceramics | (G) Catalysts used in closed processes | (G) Lanthanide group, groupiia, mn, oxide |
| P-13-0196 | 1/3/2013 | 4/2/2013 | Praxair Specialty Ceramics | (G) Catalysts used in closed processes | (G) Ni, lanthanide group, oxides |
| P-13-0197 | 1/7/2013 | 4/6/2013 | Dow Chemical Company | (G) Raw material for organic synthesis | (G) Alkyl substituted catechol |
| P-13-0198 | 1/7/2013 | 4/6/2013 | Dow Chemical Company | (G) Coating curing agent | (G) Alkyl hydroxyamine polymer with 2,2'-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]bis[oxirane] |
| P-13-0199 | 1/7/2013 | 4/6/2013 | Dow Chemical Company | (G) Coating curing agent | (G) Alkyl hydroxyamine polymer with 2,2'-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]bis[oxirane] |
| P-13-0200 | 1/8/2013 | 4/7/2013 | CBI | (S) Surfactant for use in asphalt emulsions | (G) Fatty acid amide hydrochloride |
| P-13-0201 | 1/8/2013 | 4/7/2013 | CBI | (S) Surfactant for use in asphalt emulsions | (G) Fatty acid amide hydrochloride |
| P-13-0202 | 1/8/2013 | 4/7/2013 | CBI | (S) Surfactant for use in asphalt emulsions | (G) Fatty acid amide hydrochloride |
| P-13-0203 | 1/8/2013 | 4/7/2013 | CBI | (S) Surfactant for use in asphalt emulsions | (G) Fatty acid amide hydrochloride |
| P-13-0204 | 1/8/2013 | 4/7/2013 | CBI | (S) Surfactant for use in asphalt emulsions | (G) Fatty acid amide hydrochloride |
| P-13-0205 | 1/8/2013 | 4/7/2013 | CBI | (S) Surfactant for use in asphalt emulsions | (G) Fatty acid amide hydrochloride |
| P-13-0206 | 1/8/2013 | 4/7/2013 | CBI | (S) Surfactant for use in asphalt emulsions | (G) Fatty acid amide hydrochloride |
| P-13-0207 | 1/8/2013 | 4/7/2013 | CBI | (S) Surfactant for use in asphalt emulsions | (G) Fatty acid amide hydrochloride |
| P-13-0208 | 1/8/2013 | 4/7/2013 | CBI | (S) Surfactant for use in asphalt emulsions | (G) Fatty acid amide hydrochloride |
| P-13-0209 | 1/8/2013 | 4/7/2013 | CBI | (S) Surfactant for use in asphalt emulsions | (G) Fatty acid amide hydrochloride |
| P-13-0210 | 1/8/2013 | 4/7/2013 | CBI | (G) Thermoplastic binder | (G) Styrene acrylate polymer |
| P-13-0211 | 1/8/2013 | 4/7/2013 | CBI | (G) Thermoplastic binder | (G) Styrene acrylate polymer |
| P-13-0212 | 1/8/2013 | 4/7/2013 | The Lubrizol Corporation | (S) Metalworking fluid additive (lubricity and corrosion protection) | (G) Alkenyl succinate, amine salt |
| P-13-0213 | 1/8/2013 | 4/7/2013 | The Lubrizol Corporation | (S) Metalworking fluid additive (lubricity and corrosion protection) | (G) Alkenyl succinate, amine salt |
| P-13-0214 | 1/10/2013 | 4/9/2013 | CBI | (G) Coating resin | (G) Polymer reaction product of formaldehyde, chloromethyl oxirane, phenol, 1,3-isobenzofurandione, with n-(2-aminoethyl)-1,2-ethanediamine and phenol with tetrahydro-methano-indene glycidyl ether |
| P-13-0215 | 1/11/2013 | 4/10/2013 | 3M Company | (G) Adhesive | (G) Hetero substituted alkyl acrylate polymer |
In Table II. of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the TMEs received by EPA during this period: The EPA case number assigned to the TME, the date the TME was received by EPA, the projected end date for EPA's review of the TME, the submitting manufacturer/importer, the potential uses identified by the manufacturer/importer in the TME, and the chemical identity.
| Case No. | Received date | Projected notice end date | Manufacturer/ Importer | Use | Chemical |
|---|---|---|---|---|---|
| T-13-5 | 12/10/12 | 3/16/13 | Cytec Industries, Inc. | (S)Resin for ultra violet formations | (G)Substituted carbomoncycles, polymer with alkyldiol. |
In Table III. of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the NOCs received by EPA during this period: The EPA case number assigned to the NOC, the date the NOC was received by EPA, the projected end date for EPA's review of the NOC, and chemical identity.
| Case no. | Received date | Commencement notice end date | Chemical |
|---|---|---|---|
| P-06-0203 | 1/3/2013 | 12/31/2012 | (G) Polyisobutenyl succinimide |
| P-07-0072 | 12/14/2012 | 11/19/2012 | (G) Alkanoic acid potassium salt |
| P-09-0402 | 12/11/2012 | 11/19/2012 | (G) Oxoalkyl amino acid reaction product, sodium salt |
| P-10-0361 | 12/12/2012 | 12/1/2012 | (G) Substituted phenol |
| P-10-0439 | 12/4/2012 | 10/25/2012 | (S) Benzenesulfonic acid, 4-chloro-2-{[4,5-dihydro-3-methyl-5-oxo-1-(3-sulfophenyl)-1h-pyrazole-4-yl)azo]-5-methyl,calcium salt (1:1) |
| P-10-0442 | 12/18/2012 | 12/17/2012 | (G) MDI modified resin |
| P-12-0044 | 11/30/2012 | 11/1/2012 | (G) Multi-wall carbon nanotubes |
| P-12-0064 | 12/14/2012 | 11/16/2012 | (G) Green line emitting phosphor |
| P-12-0196 | 12/19/2012 | 10/5/2012 | (G) Aromatic distillation bottoms |
| P-12-0245 | 12/27/2012 | 12/13/2012 | (S) Niobium sulfur tin zinc oxide |
| P-12-0264 | 1/10/2013 | 12/10/2012 | (G) Substituted, 2-hydroxy- N,N -dimethyl- N -[3-[[(13z)-1-oxo-13-docosen-1-yl]amino]propyl]-3-sulfo-, inner salt |
| P-12-0321 | 12/6/2012 | 11/16/2012 | (G) Aliphatic acrylate mixture |
| P-12-0378 | 1/3/2013 | 12/28/2012 | (G) Diacrylate polymer with alkane esterdiol, alkane diol, alkane acid diol and diisocyanates |
| P-12-0398 | 12/7/2012 | 11/7/2012 | (S) 1,2,4-benzenetricarboxylic acid, mixed lauryl and octyl triesters |
| P-12-0444 | 1/2/2013 | 12/18/2012 | (G) Carbopolycyclic-alkyl-[[[[[[(haloalkyl-aryl]diazenyl]aryl]diazenyl]-carbopolycyclic]diazenyl |
| P-12-0445 | 1/2/2013 | 12/18/2012 | (G) Morpholine, [[[[(haloaryl)diazenyl]-alkylaryl]-diazenyl]aryl]- |
| P-12-0446 | 1/2/2013 | 12/18/2012 | (G) Morpholine, [[[[(haloaryl)diazenyl]-alkylaryl]-diazenyl]aryl]- |
| P-12-0468 | 12/6/2012 | 11/27/2012 | (G) Doped yttrium oxalate |
| P-12-0469 | 12/6/2012 | 11/9/2012 | (G) Yttrium europium oxalate |
| P-12-0473 | 12/12/2012 | 11/23/2012 | (S) Phenol 4-(ethoxymethyl)-2-methoxy-l |
| P-12-0485 | 12/6/2012 | 11/21/2012 | (G) Oxirane, alkyl, polymer with aromatic isocyanate, alkyloxirane polymer with oxirane ether with alkyltriol, and oxirane, polyethylene glycol mono(alkylaromatic) ether-blocked |
| P-12-0519 | 12/13/2012 | 12/8/2012 | (G) Alkyd polyester polyurethane |
| P-12-0521 | 12/6/2012 | 12/3/2012 | (G) 2-Propenoic acid, 2-methyl-, alkyl esters, polymer with substituted methacrylate, substituted methacrylate, me methacrylate and polyalkene glycol alkyl ether, tert-bu 2-ethylhexaneperoxoate-initiated |
| P-12-0523 | 12/13/2012 | 11/27/2012 | (G) Alkyl ketimines; polymeric ketimines |
| P-12-0524 | 12/6/2012 | 12/3/2012 | (G) Vegetable-oil fatty acids, conjugated, polymers with ethylene glycol, substituted propanoic acid, anhydride, polyethylene glycol and trimethylolpropane, compounds with substituted alkanol |
| P-12-0526 | 1/2/2013 | 12/27/2012 | (G) Siloxanes and silicones, substituted alkyl group-terminated ethers with polyethylene glycol and polyethylene glycol anhydride ester |
| P-12-0527 | 12/6/2012 | 12/3/2012 | (G) Fatty acids of natural oils, conjugated, maleated |
| P-12-0528 | 12/11/2012 | 12/10/2012 | (G) Substituted heteromonocycle, polymer with substituted alkane and substituted alkanediol, alkanoic acid substituted ester and substituted hetermonocyle homopolymer |
| P-12-0529 | 12/5/2012 | 12/4/2012 | (G) Hydrogenated modified rosin |
| P-12-0540 | 12/18/2012 | 12/5/2012 | (G) Styrenic anhydride maleimide terpolymer |
| P-12-0542 | 12/19/2012 | 12/17/2012 | (G) Polyethyleneglycol modified polyacrylate block polypyridine polymer, hydrolyzed, sodium salts |
| P-12-0544 | 1/3/2013 | 12/24/2012 | (G) Alkenoic acid, polymers with acrylate and polyalkandiol alkane ether alkyl alkenoate and polyalkene alkandiol alkane ether alkenoic alkyl ethers |
| P-12-0564 | 1/10/2013 | 1/4/2013 | (G) 2-Propenoic acid 2-methyl, alkyl ester, polymer with heteromonocycle, substituted carbomonocycle, substituted alkyl propenoate, alkyl propenoate, alkyl propenoate, tert-bu benzenecarboperoxoate-initiated |
If you are interested in information that is not included in these tables, you may contact EPA as described in Unit II. to access additional non-CBI information that may be available.
List of Subjects
Environmental protection, Chemicals, Hazardous substances, Imports, Notice of commencement, Premanufacturer, Reporting and recordkeeping requirements, Test marketing exemptions.
Dated: February 4, 2013.
Chandler Sirmons,
Acting Director, Information Management Division, Office of Pollution Prevention and Toxics.
[FR Doc. 2013-03765 Filed 2-19-13; 8:45 am]
BILLING CODE 6560-50-P