76 FR 157 pgs. 50484-50485 - Draft Guidance for Industry, Clinical Investigators, and Food and Drug Administration Staff; Design Considerations for Pivotal Clinical Investigations for Medical Devices; Availability
Type: NOTICEVolume: 76Number: 157Pages: 50484 - 50485
Docket number: [Docket No. FDA-2011-D-0567]
FR document: [FR Doc. 2011-20603 Filed 8-12-11; 8:45 am]
Agency: Health and Human Services Department
Sub Agency: Food and Drug Administration
Official PDF Version: PDF Version
DEPARTMENT OF HEALTH AND HUMAN SERVICES
Food and Drug Administration
[Docket No. FDA-2011-D-0567]
Draft Guidance for Industry, Clinical Investigators, and Food and Drug Administration Staff; Design Considerations for Pivotal Clinical Investigations for Medical Devices; Availability
AGENCY:
Food and Drug Administration, HHS.
ACTION:
Notice.
SUMMARY:
The Food and Drug Administration (FDA) is announcing the availability of the draft guidance entitled "Design Considerations for Pivotal Clinical Investigations for Medical Devices." This document is intended to provide guidance to those involved in designing clinical studies intended to support premarket submissions for medical devices and for FDA staff who review those submissions. This guidance document describes different study design principles relevant to the development of medical device clinical studies that can be used to fulfill premarket clinical data requirements. This draft guidance is not final nor is it in effect at this time.
DATES:
Although you can comment on any guidance at any time (see 21 CFR 10.115(g)(5)), to ensure that the Agency considers your comment on this draft guidance before it begins work on the final version of the guidance, submit either electronic or written comments on the draft guidance by November 14, 2011.
ADDRESSES:
Submit written requests for single copies of the draft guidance document entitled "Design Considerations for Pivotal Clinical Investigations for Medical Devices" to the Division of Small Manufacturers, International, and Consumer Assistance, Center for Devices and Radiological Health (CDRH), Food and Drug Administration, 10903 New Hampshire Ave., Bldg. 66, rm. 4613, Silver Spring, MD 20993-0002, or to the Office of Communication, Outreach and Development (HFM-40), Center for Biologics Evaluation and Research (CBER), Food and Drug Administration, 1401 Rockville Pike, Rockville, MD 20852-1448. Send one self-addressed adhesive label to assist that office in processing your request, or fax your request to 301-847-8149. See the SUPPLEMENTARY INFORMATION section for information on electronic access to the guidance.
Submit electronic comments on the draft guidance to http://www.regulations.gov . Submit written comments to the Division of Dockets Management (HFA-305), Food and Drug Administration, 5630 Fishers Lane, rm. 1061, Rockville, MD 20852. Identify comments with the docket number found in brackets in the heading of this document.
FOR FURTHER INFORMATION CONTACT:
Greg Campbell,Center for Devices and Radiological Health,Food and Drug Administration,10903 New Hampshire Ave., Bldg. 66, rm. 2110,Silver Spring, MD 20993-0002,301-796-5750.
For devices regulated by CBER: Stephen Ripley,Center for Biologics Evaluation and Research (HFM-17),Food and Drug Administration,1401 Rockville Pike, suite 200N,Rockville, MD 20852,301-827-6210.
SUPPLEMENTARY INFORMATION:
I. Background
This draft guidance document is intended to provide guidance to those involved in designing clinical studies intended to support premarket submissions for medical devices and for FDA staff who review those submissions. Although the Agency has articulated policies related to design of studies intended to support specific device types, and a general policy of tailoring the evidentiary burden to the regulatory requirement, the Agency has not attempted to describe the different clinical study designs that may be appropriate to support a device premarket submission or to define how a sponsor should decide which pivotal clinical study design should be used to support a submission for a particular device. The draft guidance document describes different study design principles relevant to the development of medical device clinical studies that can be used to fulfill premarket clinical data requirements. The draft guidance is not intended to provide a comprehensive tutorial on the best clinical and statistical practices for investigational medical device studies.
A medical device pivotal study is a definitive study in which evidence is gathered to support the safety and effectiveness evaluation of the medical device for its intended use. Evidence from one or more pivotal clinical studies generally serves as the primary basis for the determination of reasonable assurance of safety and effectiveness of the medical device of a premarket approval application (PMA) and FDA's overall risk-benefit assessment. In some cases, a PMA may include multiple studies designed to answer different scientific questions.
The draft guidance describes principles that should be followed for the design of premarket clinical studies that are pivotal in establishing the safety and effectiveness of a medical device. Practical issues and pitfalls in pivotal clinical study design are discussed, along with their effects on the conclusions that can be drawn from the studies concerning safety and effectiveness.
II. Significance of Guidance
This draft guidance is being issued consistent with FDA's good guidance practices regulation (21 CFR 10.115). The draft guidance, when finalized, will represent the Agency's current thinking on design considerations for pivotal clinical investigations for medical devices. It does not create or confer any rights for or on any person and does not operate to bind FDA or the public. An alternative approach may be used if such approach satisfies the requirements of the applicable statute and regulations.
III. Electronic Access
Persons interested in obtaining a copy of the draft guidance may do so by using the Internet. A search capability for all CDRH guidance documents is available at http://www.fda.gov/MedicalDevices/DeviceRegulationandGuidance/GuidanceDocuments/default.htm. Guidance documents are also available from CBER at http://www.fda.gov/BiologicsBloodVaccines/GuidanceComplianceRegulatoryInformation/default.htm or on the Division of Dockets Management Internet site at http://www.regulations.gov . To receive "Design Considerations for Pivotal Clinical Investigations for Medical Devices," you may either send an e-mail request to dsmica@fda.hhs.gov to receive an electronic copy of the document or send a fax request to 301-847-8149 to receive a hard copy. Please use the document number 1776 to identify the guidance you are requesting.
IV. Paperwork Reduction Act of 1995
This draft guidance refers to previously approved collections of information found in FDA regulations. These collections of information are subject to review by the Office of Management and Budget (OMB) under the Paperwork Reduction Act of 1995 (44 U.S.C. 3501-3520). The collections of information in 21 CFR part 807, subpart E have been approved under OMB control number 0910-0120; the collections of information in 21 CFR part 812 have been approved under OMB control number 0910-0078; the collections of information in 21 CFR part 814 have been approved under OMB control number 0910-0231.
V. Comments
Interested persons may submit to the Division of Dockets Management (see ADDRESSES ), either electronic or written comments regarding this document. It is only necessary to send one set of comments. It is no longer necessary to send two copies of mailed comments. Identify comments with the docket number found in brackets in the heading of this document. Received comments may be seen in the Division of Dockets Management between 9 a.m. and 4 p.m., Monday through Friday.
Dated: August 9, 2011.
Nancy K. Stade,
Deputy Director for Policy, Center for Devices and Radiological Health.
[FR Doc. 2011-20603 Filed 8-12-11; 8:45 am]
BILLING CODE 4160-01-P