73 FR 194 pgs. 58230-58235 - Certain New Chemicals; Receipt and Status Information

Type: NOTICEVolume: 73Number: 194Pages: 58230 - 58235
Docket number: [EPA-HQ-OPPT-2008-0721; FRL-8385-4]
FR document: [FR Doc. E8-23551 Filed 10-3-08; 8:45 am]
Agency: Environmental Protection Agency
Official PDF Version:  PDF Version

ENVIRONMENTAL PROTECTION AGENCY

[EPA-HQ-OPPT-2008-0721; FRL-8385-4]

Certain New Chemicals; Receipt and Status Information

AGENCY:

Environmental Protection Agency (EPA).

ACTION:

Notice.

SUMMARY:

Section 5 of the Toxic Substances Control Act (TSCA) requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory) to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a premanufacture notice (PMN) or an application for a test marketing exemption (TME), and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from August 18, 2008 through September 12, 2008, consists of the PMNs and TME, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. This status report, also includes a PMN and TME that were inadvertently ommitted from a previous report that covered the period from August 4, 2008 through August 15, 2008.

DATES:

Comments identified by the specific PMN number or TME number, must be received on or before November 5, 2008.

ADDRESSES:

Submit your comments, identified by docket identification (ID) number EPA-HQ-OPPT-2008-0721, by one of the following methods:

Federal eRulemaking Portal : http://www.regulations.gov . Follow the on-line instructions for submitting comments.

Mail : Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001.

Hand Delivery : OPPT Document Control Office (DCO), EPA East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC. Attention: Docket ID Number EPA-HQ-OPPT-2008-0721. The DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number for the DCO is (202) 564-8930. Such deliveries are only accepted during the DCO's normal hours of operation, and special arrangements should be made for deliveries of boxed information.

Instructions : Direct your comments to docket ID number EPA-HQ-OPPT-2008-0721. EPA's policy is that all comments received will be included in the docket without change and may be made available on-line at http://www.regulations.gov , including any personal information provided, unless the comment includes information claimed to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. Do not submit information that you consider to be CBI or otherwise protected through regulations.gov or e-mail. The regulations.gov website is an "anonymous access" system, which means EPA will not know your identity or contact information unless you provide it in the body of your comment. If you send an e-mail comment directly to EPA without going through regulations.gov, your e-mail address will be automatically captured and included as part of the comment that is placed in the docket and made available on the Internet. If you submit an electronic comment, EPA recommends that you include your name and other contact information in the body of your comment and with any disk or CD-ROM you submit. If EPA cannot read your comment due to technical difficulties and cannot contact you for clarification, EPA may not be able to consider your comment. Electronic files should avoid the use of special characters, any form of encryption, and be free of any defects or viruses. For additional information about EPA's public docket, visit the EPA Docket Center homepage at http://www.epa.gov/epahome/dockets.htm .

Docket : All documents in the docket are listed in the docket index available in regulations.gov. To access the electronic docket, go to http://www.regulations.gov , select "Advanced Search," then "Docket Search." Insert the docket ID number where indicated and select the "Submit" button. Follow the instructions on the regulations.gov website to view the docket index or access available documents. Although listed in the index, some information is not publicly available, e.g., CBI or other information whose disclosure is restricted by statute. Certain other material, such as copyrighted material, will be publicly available only in hard copy. Publicly available docket materials are available electronically at http://www.regulations.gov , or, if only available in hard copy, at the OPPT Docket. The OPPT Docket is located in the EPA Docket Center (EPA/DC) at Rm. 3334, EPA West Bldg., 1301 Constitution Ave., NW., Washington, DC. The EPA/DC Public Reading Room hours of operation are 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding Federal holidays. The telephone number of the EPA/DC Public Reading Room is (202) 566-1744, and the telephone number for the OPPT Docket is (202) 566-0280. Docket visitors are required to show photographic identification, pass through a metal detector, and sign the EPA visitor log. All visitor bags are processed through an X-ray machine and subject to search. Visitors will be provided an EPA/DC badge that must be visible at all times in the building and returned upon departure.

FOR FURTHER INFORMATION CONTACT:

Colby Lintner, Regulatory Coordinator, Environmental Assistance Division, Office of Pollution Prevention and Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number: (202) 554-1404; e-mail address: TSCA-Hotline@epa.gov .

SUPPLEMENTARY INFORMATION:

I. General Information

A. Does this Action Apply to Me?

This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitter of the premanufacture notices addressed in the action. If you have any questions regarding the applicability of this action to a particular entity, consult the person listed under FOR FURTHER INFORMATION CONTACT .

B. What Should I Consider as I Prepare My Comments for EPA?

1. Submitting CBI . Do not submit this information to EPA through regulations.gov or e-mail. Clearly mark the part or all of the information that you claim to be CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and then identify electronically within the disk or CD-ROM the specific information that is claimed as CBI. In addition to one complete version of the comment that includes information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2.

2. Tips for preparing your comments . When submitting comments, remember to:

i. Identify the document by docket ID number and other identifying information (subject heading, Federal Register date and page number).

ii. Follow directions. The Agency may ask you to respond to specific questions or organize comments by referencing a Code of Federal Regulations (CFR) part or section number.

iii. Explain why you agree or disagree; suggest alternatives and substitute language for your requested changes.

iv. Describe any assumptions and provide any technical information and/or data that you used.

v. If you estimate potential costs or burdens, explain how you arrived at your estimate in sufficient detail to allow for it to be reproduced.

vi. Provide specific examples to illustrate your concerns and suggest alternatives.

vii. Explain your views as clearly as possible, avoiding the use of profanity or personal threats.

viii. Make sure to submit your comments by the comment period deadline identified.

II. Why is EPA Taking this Action?

Section 5 of TSCA requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a PMN or an application for a TME and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from August 18, 2008 through September 12, 2008, consists of the PMNs and TME, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. This status report, also includes a PMN and TME that were inadvertently ommitted from a previous report that covered the period from August 4, 2008 through August 15, 2008.

III. Receipt and Status Report for PMNs

This status report identifies the PMNs and TME, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. If you are interested in information that is not included in the following tables, you may contact EPA as described in Unit I. to access additional non-CBI information that may be available.

In Table I of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the PMNs received by EPA during this period: the EPA case number assigned to the PMN; the date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer; the potential uses identified by the manufacturer in the PMN; and the chemical identity.

Case No. Received Date Projected Notice End Date Manufacturer/Importer Use Chemical
P-08-0624 07/25/08 10/22/08 Cytec Industrial Inc. (G) Coating resin (G) Alphatic polyurethane
P-08-0654 08/18/08 11/15/08 CBI (S) Thixotrope for alkyd resins used in paint and coating compositions. (G) Fatty acids, C 18 -unsaturated, dimers, polymers with diamines and monoacids.
P-08-0655 08/18/08 11/15/08 CBI (S) Thixotrope for alkyd resins used in paint and coating compositions. (G) Fatty acids, C 18 -unsaturated, dimers, polymers with diamines and monoacids.
P-08-0656 08/18/08 11/15/08 CBI (S) Binder in flexographic or packaging gravure printing inks and varnishes (G) Fatty acids, C 18 -unsaturated, dimers, polymers with diamines and monoacids.
P-08-0657 08/18/08 11/15/08 CBI (S) Thixotrope for alkyd resins used in paint and coating compositions. (G) Fatty acids, C 18 -unsaturated, dimers, polymers with diamines and monoacids.
P-08-0658 08/18/08 11/15/08 CBI (S) Thixotrope for alkyd resins used in paint and coating compositions. (G) Fatty acids, C 18 -unsaturated, dimers, polymers with diamines and monoacids.
P-08-0659 08/18/08 11/15/08 Halosource, Inc. (S) Stormwater purifier for construction sites (S) Chitosan, 2-hydroxypropanoate (salt)
P-08-0660 08/18/08 11/15/08 Halosource, Inc. (S) Stormwater purifier for construction sites (S) Chitosan, acetate (salt)
P-08-0661 08/18/08 11/15/08 CBI (G) Paper manufacture chemical (S) Hexanedioic acid, polymers with amine-contg. hydrolyzed N -ethenylformamide-vinyl acetate polymer, epichlorohydrin and triethylenetetramine, sulfates (salts)
P-08-0662 08/18/08 11/15/08 CBI (G) Precursor for paper manufacture chemical (S) Hexanedioic acid, polymer with N 1, N 2-bis(2-aminoethyl)-1,2-ethanediamine
P-08-0663 08/18/08 11/15/08 CBI (G) Colorant for industrial application (G) Mixed dichlorobenzidine and substituted alkylamides
P-08-0664 08/19/08 11/16/08 CBI (G) Textile finish (G) Fluorinated acrylic copolymer
P-08-0665 08/20/08 11/17/08 CBI (G) Concrete additive (G) Acrylic acid ester polymer with vinyl glycol derivative and cyclic alkene anhydride
P-08-0666 08/20/08 11/17/08 CBI (G) Concrete additive (G) Acrylic acid ester polymer with vinyl glycol derivative and cyclic alkene anhydride potassium salt
P-08-0667 08/20/08 11/17/08 CBI (G) Concrete additive (G) Acrylic acid ester polymer with vinyl glycol derivative and cyclic alkene anhydridesodum potassium salt
P-08-0668 08/20/08 11/17/08 CBI (G) Adhesion promoter (G) Chlorinated polyolefin
P-08-0669 08/21/08 11/18/08 CBI (G) Oligomer (G) Urethane acrylate
P-08-0670 08/21/08 11/18/08 CBI (G) Oligomer (G) Urethane acrylate
P-08-0671 08/21/08 11/18/08 Hi-Tech Color, Inc. (S) Adhesives for industrial material (S) Hexanedioic acid, polymer with 1,4-butanediol, 1,3-diisocyanatomethylbenzene and 1,2-propanediol
P-08-0672 08/21/08 11/18/08 CBI (G) Open non-dispersive use (adhesive resin) (G) Polyester polyurethane aqueous dispersion
P-08-0673 08/22/08 11/19/08 CBI (S) Filler for rubber (G) Functional metal hydroxide
P-08-0674 08/22/08 11/19/08 CBI (G) Component in colorants (G) Mixed metal oxides
P-08-0677 08/25/08 11/22/08 Incorez Corporation (S) Amine hardener used in the formulation of epoxy based paints and coatings (G) Polyamine epoxy adduct
P-08-0678 08/25/08 11/22/08 Evonik-Degussa Corporation (S) Extrusion of tubing systems; injection molded semi-finished articles (G) Polymer of alkanedioic acid and alkanediamine
P-08-0679 08/26/08 11/23/08 CBI (G) Pour point depressant (G) Furandione polymer with ethenylbenzene, alkyl ester
P-08-0680 08/26/08 11/23/08 CBI (S) Herbicide safener and plant growth regulator for agricultural seed treatment; Incorporated into FIFRA registered pesticide (S) N -[[4-[(cyclopropylamino)carbonyl] phenyl]sulfonyl]-2-methoxybenzamide
P-08-0681 08/26/08 11/23/08 CBI (G) Printing additive (G) Polyester resin
P-08-0682 08/27/08 11/24/08 CBI (S) Metal working lubricant (G) Ethoxylated maleated triglyceride polymer
P-08-0683 08/27/08 11/24/08 CBI (S) Metal working lubricant (G) Ethoxylated maleated triglyceride polymer
P-08-0684 08/27/08 11/24/08 CBI (S) Metal working lubricant (G) Ethoxylated maleated triglyceride polymer
P-08-0686 08/27/08 11/24/08 Incorez Corporation (G) Polyurethane resin for coating (G) Polyurethane prepolymer for coatings
P-08-0687 08/25/08 11/22/08 CBI (G) Lubricant additive (G) Amines, polyethylenepoly-, reaction products with isostearic acid and disubstituted methanal. Alkylamide, N -(2-ethylhexyl)-
P-08-0688 08/27/08 11/24/08 CBI (G) This PMN substance aids in the polymerization of a polymer and is inextricably bound in the cured polymer once polymerized. (G) Epoxy-amine adduct
P-08-0689 08/27/08 11/24/08 CBI (G) Processing aid (G) Substituted aliphatic amine
P-08-0690 08/28/08 11/25/08 CBI (G) Catalyst (G) Mixed metal oxide
P-08-0691 08/28/08 11/25/08 CBI (G) Oil-field additive (G) Vinyl acetate copolymer
P-08-0692 08/27/08 11/24/08 CBI (G) Oligomer (G) Epoxy acrylates
P-08-0693 08/29/08 11/26/08 Cytec Industries Inc. (S) Resin for paints and coatings (G) Substituted carbomonocycles, polymer with substituted glycols and alkyldioic acid
P-08-0694 08/29/08 11/26/08 Hexion Specialty Chemicals, Inc. (G) Curative to be used with epoxy resin; curative to be used with isocyanates in urethane systems; intermediate for synthesis of epoxy resins (G) N -arylamino-phenol-formaldehyde condensate
P-08-0695 09/02/08 11/30/08 CBI (G) Component in a epoxy-urethane structural adhesive (G) Blocked polyurethane prepolymer
P-08-0696 09/03/08 12/01/08 CBI (G) Additive for concrete construction (G) Alkenoic acid, metal salt, polymer with (alkyl ( C =1-3) alkenyl)hydroxypoly (substituted alkane( C =2-4)diyl), graft
P-08-0697 09/03/08 12/01/08 Henkel Corporation (S) An accelerator in industrial adhesive formulations (S) 2,5-furandione, telomer wth ethenylbenzene and (1-methylethyl)benzene, 2-phenylhydrazides
P-08-0698 09/04/08 12/02/08 Henkel Corporation (S) A polymerizeable component of adhesive formulations for general industrial bonding applications (S) Cyclohexanol, 4,4'-(1-methylethylidene)bis-, polymer with 1,3-diisocyanatomethylbenzene and, .alpha.-hydro-omega.- hydroxypoly(oxy-1,4-butanediyl), 2-hydroxy-1-[4-(2-hydroxyethoxy)phenyl]-2-methyl-1-propanone- and propylene glycol monomethacrylate-blocked
P-08-0699 09/04/08 12/02/08 CBI (G) Intermediate (G) Alkoxysilane
P-08-0700 09/05/08 12/03/08 CBI (G) Epoxy adduct component in a structural adhesive (G) Epoxy prepolymer
P-08-0701 09/08/08 12/06/08 CBI (G) Pigment for plastics coloration - dispersive use (G) Benzoic acid, 4-chloro-2-[(substituted)azo]-, strontium salt (1:1)
P-08-0702 09/08/08 12/06/08 Incorez Corporation (G) Polyurethane resin for coating (G) Polyurethane prepolymer
P-08-0703 09/08/08 12/06/08 CBI (G) Ink ingredient (G) Dihydroxyalkanoic acid, polymer with polyetherdiol and alicyclic diisocyanate
P-08-0704 09/09/08 12/07/08 CBI (G) Site limited intermediate for personal care ingredient; site limited intermediate for foam control agents (G) Linear alkyl epoxide
P-08-0705 09/09/08 12/07/08 Orient Corporation of America (S) Colorant for industrial inkjet printer (S) Chromium, 1-[2-[5-(1,1-dimethylpropyl)-2-hydroxy-3-nitrophenyl]diazenyl]-2-naphthalenol 1-[2-[2-hydroxy-4(or 5)-nitrophenyl]diazenyl]-2-naphthalenol ammonium sodium complexes
P-08-0706 09/11/08 12/09/08 CBI (S) Curing agent for epoxy resin in protective coatings (G) Amides, from C 18 -unsaturated fatty acid dimers, aliphatic polyamines, aliphatic polyamine N -benzyl derivatives, and tall-oil fatty acids
P-08-0707 09/11/08 12/09/08 Strategic Marketing and Management Associates (G) Aromatic additive (S) 2 H -2,4 A -methanonaphthalen-1(5 H )-one, hexahydro-5,5-dimethyl-*
P-08-0708 09/11/08 12/09/08 CBI (G) Raw material for electronic parts (G) Phenol, 4,4'-substituted, polymer with 2,2'-[(3,3',5,5'-tetramethyl[1,1'-biphenyl]-4,4'diyl)bis(oxymethylene)]bis[oxirane]
P-08-0709 09/12/08 12/10/08 CBI (G) Additive, open, non-dispersive use (G) Alkylacrylates, copolymers with alkylmethacrylates and modified methacrylates

In Table II of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the TMEs received:

Case No. Received Date Projected Notice End Date Manufacturer/Importer Use Chemical
P-08-0624 07/25/08 10/22/08 Cytec Industrial Inc. (G) Coating resin (G) Alphatic polyurethane
T-08-0020 08/29/08 10/12/08 Cytec Industries Inc. (S) Resin for paints and coatings (G) Substituted carbomonocycles, polymer with substituted glycols and alkyldioic acid

In Table III of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the Notices of Commencement to manufacture received:

Case No. Received Date Commencement Notice End Date Chemical
P-05-0605 08/21/08 08/11/08 (S) Fatty acids, C 16-18 and C 18 -unsaturated, reaction products with lactic acid and monosodium lactate
P-06-0638 09/04/08 08/23/08 (G) Crosslinked cyclic polyester
P-06-0828 09/02/08 08/25/08 (G) Polyacrylate terpolymer salt
P-07-0388 08/20/08 08/03/08 (G) Polydimethylsiloxane hydroxyalkyl terminated, polymers with diisocyanate and aminoalkyl groups aliphatic amine blocked, acetates
P-07-0400 08/26/08 08/07/08 (G) Aliphatic polyurethane resin
P-07-0438 08/22/08 08/09/08 (G) Polyester polyol
P-07-0538 09/02/08 08/21/08 (G) Organic tallate salt
P-08-0040 09/03/08 08/07/08 (G) Polyurethane hybrid
P-08-0068 09/09/08 08/21/08 (S) Oils, Schinus Terebinthifolius Extractives and their physically modified derivatives. Schinus Terebinthifolius .
P-08-0073 09/02/08 08/12/08 (G) Aliphatic polyisocyanate, C 16 -alcohol and polyalkylene glycol-blocked
P-08-0095 08/21/08 08/19/08 (S) Phosphonium, methyltris (2-methylpropyl)-, salt with 4-methylbenzenesulfonic acid (1:1)
P-08-0113 09/09/08 08/21/08 (S) Oils, Vanilla tahitensis Extractives and their physically modified derivatives.
P-08-0184 09/10/08 09/05/08 (G) Polyacrylate/vinylpyridine block copolymer
P-08-0214 09/03/08 08/02/08 (G) Aromatic urethane acrylate polymer
P-08-0223 08/28/08 08/16/08 (G) Fluoroalkyl acrylate copolymer
P-08-0236 08/21/08 08/19/08 (G) Acrylate copolymer
P-08-0253 09/10/08 09/07/08 (G) Unsaturated polyester resin
P-08-0264 09/09/08 08/27/08 (G) Polyester
P-08-0268 08/18/08 07/17/08 (G) Silicone modified urethane adduct
P-08-0272 09/09/08 08/21/08 (S) Oils, Passionflower, Passiflora Edulis Extractives and their physically modified derivatives. Passiflora Edulis .
P-08-0276 08/19/08 08/01/08 (G) Substituted-carbopolycyclic-[[heterocycle)-heterocycle-diyl]diimino]bis[substituted-[[sulfocarbocycle]azo]carbocycle]azo]-, sodium salt
P-08-0285 09/09/08 08/21/08 (S) Oils, Peach Extractives and their physically modified derivatives. Prunus Persica .
P-08-0303 09/09/08 08/21/08 (S) Oils, Siparuna Guianesis Extractives and their physically modified derivatives. Siparuna Guianensis .
P-08-0306 08/28/08 08/19/08 (G) Polyether urethane block copolymer
P-08-0308 09/04/08 08/26/08 (G) Heteromonocycle carboxylic acid, bromo-(3-chloro-2-pyridinyl)-dihydro-, ethyl ester
P-08-0309 09/10/08 09/04/08 (G) Heteromonocycle carboxylic acid, bromo-(3-chloro-2-pyridinyl)-, ethyl ester
P-08-0311 09/04/08 08/21/08 (G) Heteromonocycle carboxylic acid, (3-chloro-2-pyridinyl)-dihydro-[(phenylsulfonyl)oxy]-, ethyl ester
P-08-0312 09/09/08 08/21/08 (S) Excretions, hyraceum, ext. The ethanol soluble components obtained from the extraction of hyraceum (sticky mass of dung and urine) from procavia carpensis
P-08-0329 08/20/08 08/14/08 (G) Polyurethane derivative
P-08-0336 09/05/08 07/01/08 (G) Polymer with E -caprolactone, hydroxystearic acid, methyldiethaholamine and dicyclohehylmethane diisocyanate
P-08-0341 09/09/08 08/21/08 (S) Oils, Guava, Psidium Guajava Extractives and their physically modified derivatives. Psidium Guajava
P-08-0342 09/09/08 08/21/08 (S) Oils, Mango Extractives and their physically modified derivatives. Mangifera Indica .
P-08-0346 08/28/08 08/05/08 (G) Isocyanic acid, alkylene ester, propylene glycol monomethacrylate-blocked
P-08-0356 09/09/08 08/21/08 (S) Oils, Papaya Extractives and their physically modified derivatives. Carica Papaya .
P-08-0357 09/03/08 08/26/08 (G) Polyol
P-08-0366 09/09/08 08/21/08 (S) Oils, Euterpe Precutoria Extractives and their physically modified derivatives. Euterpe Precatoria .
P-08-0375 08/28/08 08/01/08 (G) TS-S692P3 and TS-S694P3: Fatty acid dimers, polymers with diols, cyclical diacid, aromatic polyacid; TS-S693P3 and TS-S695P3: Fatty acid dimers, polymers with diols, cyclical diacid, aromatic polyacid, compounds with amine
P-08-0379 09/09/08 08/21/08 (S) Oils Amomum tsao-ko Extractives and their physically modified derivatives. Amomum tsao-ko, Zingiberaceae .
P-08-0381 09/09/08 08/21/08 (S) Oils, Inula Nervosa Extractives and their physically modified derivatives. Inula Nervosa, Aasteraceae .
P-08-0385 08/15/08 07/31/08 (G) Lithium salt of cyclic disulfonic acid
P-08-0389 09/09/08 08/21/08 (S) Honey, desaccharided
P-08-0390 09/03/08 08/22/08 (G) Acrylate polymer with vinyl ether
P-08-0397 09/02/08 08/25/08 (S) 2,4'-dimethylpropiophenone
P-08-0402 09/09/08 08/21/08 (S) Oils, Citrus Hystrix Extractives and their physically modified derivatives. Citrus Hystrix .
P-08-0403 09/09/08 08/21/08 (S) Oils, Kaempferia Galanga Extractives and their physically modified derivatives. Kaempferia Galanga .
P-08-0408 09/03/08 08/22/08 (S) Oils, Dalbergia Cochinchinensis Extractives and their physically modified derivatives. Dalbergia Cochinchinensis .
P-08-0417 09/09/08 08/21/08 (S) Oils Kumquat, Fortunella Margarita Extractives and their physically modified derivatives. Fortunella margarita .
P-08-0437 08/25/08 08/19/08 (G) Amine carboxylate
P-98-0134 08/20/08 07/23/08 (G) Styrene acrylate
P-99-0449 08/26/08 08/05/08 (G) Isocyanate modified polymer

List of Subjects

Environmental protection, Chemicals, Premanufacturer notices.

Dated: September 29, 2008.

Chandler Sirmons,

Acting Director, Information Management Division, Office of Pollution Prevention and Toxics.

[FR Doc. E8-23551 Filed 10-3-08; 8:45 am]

BILLING CODE 6560-50-S