67 FR 50 pgs. 11463-11465 - Certain Hot-Rolled Flat-Rolled Carbon Quality Steel Products From Brazil: Rescission of Administrative Review of the Agreement Suspending the Antidumping Duty Investigation
Type: NOTICEVolume: 67Number: 50Pages: 11463 - 11465
Docket number: [A-351-828]
FR document: [FR Doc. 02-6175 Filed 3-13-02; 8:45 am]
Agency: Commerce Department
Sub Agency: International Trade Administration
Official PDF Version: PDF Version
DEPARTMENT OF COMMERCE
International Trade Administration
[A-351-828]
Certain Hot-Rolled Flat-Rolled Carbon Quality Steel Products From Brazil: Rescission of Administrative Review of the Agreement Suspending the Antidumping Duty Investigation
AGENCY:
Import Administration, International Trade Administration, Department of Commerce.
ACTION:
Notice of rescission of antidumping duty administrative review.
SUMMARY:
On August 20, 2001, in response to a request made by Bethlehem Steel Corporation, LTV Steel Company Inc., National Steel Corporation, and United States Steel LLC ("Domestic Producers"), the Department of Commerce ("the Department") published in the Federal Register (66 FR 43570) a notice announcing the initiation of an administrative review of the agreement suspending the antidumping duty investigation on certain hot-rolled flat-rolled carbon quality steel products from Brazil. The review period is July 1, 2000 to June 30, 2001. This review has now been rescinded because Domestic Producers have withdrawn their request for review.
EFFECTIVE DATE:
March 14, 2002.
FOR FURTHER INFORMATION CONTACT:
Michael Ferrier, Enforcement Group III, Office 8, Import Administration, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue, NW., Room 7866, Washington, DC 20230; telephone (202) 482-1394.
The Applicable Statute
Unless otherwise indicated, all citations to the Tariff Act of 1930, as amended (the Act) are references to the provisions effective January 1, 1995, the effective date of the amendments made to the Act by the Uruguay Round Agreements Act (URAA). In addition, unless otherwise indicated, all citations to the Department's regulations are references to the provisions codified at 19 CFR part 351 (2001).
Scope of the Review
The products covered are certain hot-rolled flat-rolled carbon-quality steel products of a rectangular shape, of a width of 0.5 inch or greater, neither clad, plated, nor coated with metal and whether or not painted, varnished, or coated with plastics or other non-metallic substances, in coils (whether or not in successively superimposed layers) regardless of thickness, and in straight lengths, of a thickness less than 4.75 mm and of a width measuring at least 10 times the thickness. Universal mill plate ( i.e., flat-rolled products rolled on four faces or in a closed box pass, of a width exceeding 150 mm, but not exceeding 1250 mm and of a thickness of not less than 4 mm, not in coils and without patterns in relief) of a thickness not less than 4.0 mm is not included within the scope of this agreement.
Specifically included in this scope are vacuum degassed, fully stabilized (commonly referred to as interstitial-free (IF)) steels, high strength low alloy (HSLA) steels, and the substrate for motor lamination steels. IF steels are recognized as low carbon steels with micro-alloying levels of elements such as titanium and/or niobium added to stabilize carbon and nitrogen elements. HSLA steels are recognized as steels with micro-alloying levels of elements such as chromium, copper, niobium, titanium, vanadium, and molybdenum. The substrate for motor lamination steels contains micro-alloying levels of elements such as silicon and aluminum.
Steel products to be included in the scope of this agreement, regardless of HTSUS definitions, are products in which: (1) Iron predominates, by weight, over each of the other contained elements; (2) the carbon content is 2 percent or less, by weight; and (3) none of the elements listed below exceeds the quantity, by weight, respectively indicated:
1.80 percent of manganese, or
1.50 percent of silicon, or
1.00 percent of copper, or
0.50 percent of aluminum, or
1.25 percent of chromium, or
0.30 percent of cobalt, or
0.40 percent of lead, or
1.25 percent of nickel, or
0.30 percent of tungsten, or
0.012 percent of boron, or
0.10 percent of molybdenum, or
0.10 percent of niobium, or
0.41 percent of titanium, or
0.15 percent of vanadium, or
0.15 percent of zirconium.
All products that meet the physical and chemical description provided above are within the scope of this agreement unless otherwise excluded. The following products, by way of example, are outside and/or specifically excluded from the scope of this agreement:
• Alloy hot-rolled steel products in which at least one of the chemical elements exceeds those listed above (including e.g., ASTM specifications A543, A387, A514, A517, and A506).
• SAE/AISI grades of series 2300 and higher.
• Ball bearing steels, as defined in the HTSUS.
• Tool steels, as defined in the HTSUS.
• Silico-manganese (as defined in the HTSUS) or silicon electrical steel with a silicon level exceeding 1.50 percent.
• ASTM specifications A710 and A736.
• USS Abrasion-resistant steels (USS AR 400, USS AR 500).
• Hot-rolled steel coil which meets the following chemical, physical and mechanical specifications:
| C | Mn | P | S | Si | Cr | Cu | Ni |
|---|---|---|---|---|---|---|---|
| 0.10-0.14% | 0.90% | 0.025% Max | 0.005% Max | 0.30-0.50% | 0.30-0.50% | 0.20-0.40% | 0.20% Max. |
Width = 44.80 inches maximum; Thickness = 0.063-0.198 inches;Yield Strength = 50,000 ksi minimum; Tensile Strength = 70,000-88,000 psi.
• Hot-rolled steel coil which meets the following chemical, physical and mechanical specifications:
| C | Mn | P | S | Si | Cr | Cu | Ni |
|---|---|---|---|---|---|---|---|
| 0.10-0.16 | 0.70-0.90 | 0.025% Max | 0.006% Max | 0.30-0.50% | 0.30-0.50% | 0.25% Max | 0.20% Max. |
| Mo | |||||||
| 0.21% Max |
Width = 44.80 inches maximum; Thickness = 0.350 inches maximum;
Yield Strength = 80,000 ksi minimum; Tensile Strength = 105,000 psi Aim.
• Hot-rolled steel coil which meets the following chemical, physical and mechanical specifications:
| C | Mn | P | S | Si | Cr | Cu | Ni |
|---|---|---|---|---|---|---|---|
| 0.10-0.14% | 1.30-1.80% | 0.025% Max | 0.005% Max | 0.30-0.50% | 0.50%-0.70% | 0.20-0.40% | 0.20% Max. |
| V(wt.) | Cb | ||||||
| 0.10% Max | 0.08% Max |
Width = 44.80 inches maximum; Thickness = 0.350 inches maximum;
Yield Strength = 80,000 ksi minimum; Tensile Strength = 105,000 psi Aim.
• Hot-rolled steel coil which meets the following chemical, physical and mechanical specifications:
| C | Mn | P | S | Si | Cr | Cu | Ni |
|---|---|---|---|---|---|---|---|
| 0.15% Max | 1.40% Max | 0.025% Max | 0.010% Max | 0.50% Max | 1.00% Max | 0.50% Max | 0.20% Max |
| Nb | Ca | A1 | |||||
| 0.005% Min | Treated | 0.01-0.07% |
Width = 39.37 inches; Thickness = 0.181 inches maximum; Yield Strength = 70,000 psi minimum for thicknesses = 0.148 inches and 65,000 psi minimum for thicknesses 0.148 inches; Tensile Strength = 80,000 psi minimum.
• Hot-rolled dual phase steel, phase-hardened, primarily with a ferritic-martensitic microstructure, contains 0.9 percent up to and including 1.5 percent silicon by weight, further characterized by either (i) tensile strength between 540 N/mm 2 and 640 N/mm 2 and an elongation percentage = 26 percent for thicknesses of 2 mm and above, or (ii) a tensile strength between 590 N/mm 2 and 690 N/mm 2 and an elongation percentage = 25 percent for thicknesses of 2 mm and above.
• Hot-rolled bearing quality steel, SAE grade 1050, in coils, with an inclusion rating of 1.0 maximum per ASTM E 45, Method A, with excellent surface quality and chemistry restrictions as follows: 0.012 percent maximum phosphorus, 0.015 percent maximum sulfur, and 0.20 percent maximum residuals including 0.15 percent maximum chromium.
• Grade ASTM A570-50 hot-rolled steel sheet in coils or cut lengths, width of 74 inches (nominal, within ASTM tolerances), thickness of 11 gauge (0.119 inch nominal), mill edge and skin passed, with a minimum copper content of 0.20%.
The merchandise subject to this agreement is classified in the Harmonized Tariff Schedule of the United States (HTSUS) at subheadings: 7208.10.15.00, 7208.10.30.00, 7208.10.60.00, 7208.25.30.00, 7208.25.60.00, 7208.26.00.30, 7208.26.00.60, 7208.27.00.30, 7208.27.00.60, 7208.36.00.30, 7208.36.00.60, 7208.37.00.30, 7208.37.00.60, 7208.38.00.15, 7208.38.00.30, 7208.38.00.90, 7208.39.00.15, 7208.39.00.30, 7208.39.00.90, 7208.40.60.30, 7208.40.60.60, 7208.53.00.00, 7208.54.00.00, 7208.90.00.00, 7210.70.30.00, 7210.90.90.00, 7211.14.00.30, 7211.14.00.90, 7211.19.15.00, 7211.19.20.00, 7211.19.30.00, 7211.19.45.00, 7211.19.60.00, 7211.19.75.30, 7211.19.75.60, 7211.19.75.90, 7212.40.10.00, 7212.40.50.00, 7212.50.00.00. Certain hot-rolled flat-rolled carbon-quality steel covered by this agreement, including: vacuum degassed, fully stabilized; high strength low alloy; and the substrate for motor lamination steel may also enter under the following tariff numbers: 7225.11.00.00, 7225.19.00.00, 7225.30.30.50, 7225.30.70.00, 7225.40.70.00, 7225.99.00.90, 7226.11.10.00, 7226.11.90.30, 7226.11.90.60, 7226.19.10.00, 7226.19.90.00, 7226.91.50.00, 7226.91.70.00, 7226.91.80.00, and 7226.99.00.00. Although the HTSUS subheadings are provided for convenience and Customs purposes, the written description of the merchandise under this agreement is dispositive.
Background
On July 31, 2001, Domestic Producers, as Petitioners in the suspended investigation, requested an administrative review of the agreement suspending the antidumping duty investigation on hot-rolled flat-rolled carbon quality steel from Brazil published in the Federal Register on July 19, 1999 (64 FR 38792). On August 20, 2001, the Department published in the Federal Register (66 FR 43570) a notice of "Initiation of Antidumping and Countervailing Duty Administrative Reviews and Requests for Revocations in Part" initiating the administrative review. On February 19, 2002, Domestic Producers withdrew their request for the review. The applicable regulation, 19 CFR 351.213(d)(1), states that if a party that requested an administrative review withdraws the request within 90 days of the publication of the notice of initiation of the requested review, the Secretary will rescind the review. Additionally, the Secretary may extend this time limit if the Secretary decides that it is reasonable to do so. Given that we have received no submissions opposing Domestic Producers' request for withdrawal of the administrative review and the Department terminated the suspension agreement in the first administrative review of the suspension agreement, we find it reasonable to extend the time period for filing a withdrawal request. Based upon Domestic Producers' request, therefore, we are rescinding this review of the agreement suspending the antidumping duty investigation on hot-rolled flat-rolled carbon quality steel from Brazil covering the period July 1, 2000 through June 30, 2001.
This notice is issued and published in accordance with section 777(i) of the Act and 19 CFR 351.213(d)(4).
Dated: March 6, 2002.
Joseph A. Spetrini,
Deputy Assistant Secretary for Import Administration, Group III.
[FR Doc. 02-6175 Filed 3-13-02; 8:45 am]
BILLING CODE 3510-DS-P